3
IMPORTANT INFORMATION
This cleaner should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is
fully understood before operating the appliance. Use only attachments recommended or supplied by Hoover. The charger
base is double insulated and must not be earthed.
Electrical Requirements
This Hoover appliance is supplied with a double insulated battery charger which is only suitable for insertion in a 230V (UK
240V) socket outlet. Ensure that the charger rating label matches your voltage supply.
SAFETY REMINDERS
DO NOT let children play with the appliance or its controls. Please supervise the use of the appliance by older
children, the elderly or the infirm.
DO NOT use your cleaner outdoors, on wet surfaces or for wet pickup.
DO NOT pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.
DO NOT spray with, or pick up flammable liquids such as cleaning fluids, petrol, etc, or their vapours, as they
may cause an explosion or fire.
DO NOT replace the NiMH batteries with non rechargable batteries.
DO frequently clean the dust cup and filter assembly.
DO return the appliance to the charger base after use to recharge the batteries. Occasionally fully discharge the
batteries to obtain the maximum battery life.
servicing or repairs are only carried out by an authorised Hoover service engineer.
PRODUCT COMPONENTS
1 - Main Cleaner 2 - Handheld cleaner 3 - Filters
Main BodyA.
On/Off SwitchB.
On/Off Turbo SwitchC.
Push and Go Release buttonD.
Handheld Cleaning UnitE.
Nozzle release ButtonF.
Carpet and Floor NozzleG.
ChargerH.
Charger IndicatorI.
Power CordJ.
Crevice ToolK.
Dusting BrushL.
On/Off SwitchM.
Bin Empty TriggerN.
Filter Access ButtonO.
Dust ContainerP.
Filter ScreenQ.
FilterR.
PREPARING YOU CLEANER
Line up the handle to the main body of the cleaner and push into the main body until it locks in place. 1. [4]
2. [5]
Assemble the handheld unit 3. [2] to the main body.
4.
The indicator light will illuminate when charging.5.
Note: To remove the nozzle press the nozzle release button and pull away from the main body.
Note: Use only the charger supplied with your cleaner to recharge.
Important:
When charging the cleaner the On/Off switch must be OFF.
Keep the charger plugged into the socket at all times. It is normal for the charger to become warm to the touch when
charging.
If the operating times reduces after repeated use let the cleaner run until it stops then recharge for 24 hours, repeat this
monthly for best results.
GB
