4
USING YOUR CLEANER
Main cleaner
Turn the cleaner on by pressing the On/Off button. 1. [1B]
Set the On/Off Turbo switch to the desired cleaning mode. 2. [1C]
CARPET: Switch Turbo Nozzle ON (LED will be ON.)
HARD FLOOR: Switch Turbo Nozzle OFF (LED will be OFF.)
Handheld Cleaner
Press the Push and Go button and lift the handheld unit from the cleaner main body. 1. {6]
Turn the handheld cleaner on by pressing the On/Off button.2. [2M]
ACCESSORIES
Crevice Tool and Dusting brush
CLEANER MAINTENANCE
Emptying the Dust Container
Hold the unit over a bin and pull the bin empty trigger [2N] to instantly empty the dust container. [7]
Cleaning the Filters
Release the handheld unit from the main body of the cleaner.1.
2. [2O] and remove the handle section from the dust container. [8]
3. [9]
4.
Reassemble the handheld unit and return to the cleaner main body.5.
Changing the Agitator
Using a coin turn the lock to the open position.1. [10]
Remove the agitator retainer.2.
Unloop the belt and lift the agitator out of the cleaner.3. [11]
Loop the belt aound the new agitator and return to its original position. Replace the agitator retainer and lock in 4.
place.
End of Product Life Battery Disposal
If the cleaner is to be disposed of the batteries should be removed. Used batteries should be taken to a recycling station
and not disposed with household waste.
IMPORTANT:
Always fully discharge the batteries before removal.
1.
Release the handheld unit from the main body of the cleaner.2.
3.
Remove 6 screws and open the unit.4. [12]
Remove the motor/battery housing and disconnect the cables.5.
Remove the batteries from the housing.6.
or for more detailed information about treatment,
GB