10
Lift the tab on the exhaust lter cover grille and
remove from the cleaner.
Wash the exhaust lter under hand warm water
until the water runs clean. Remove excess water
by shaking and leave to dry for 24 hours.
Refit filter only when completely dry.
DO NOT USE HOT WATER OR DETERGENTS
.
Remove the exhaust lter.
CLEANING THE EXHAUST FILTER
CLEANING THE PRE MOTOR FILTERS
Press the bin release buttons
and remove the dust bin from
the cleaner.
Remove the pet hair remover
turbo brush from the top cover
of the cleaner.
1
1
Place the bin on a at surface
and press the lter access
button to open the top cover of
the bin.
2
2
Remove the BLUE lter pack
(containing the HEPA and foam
lter).
3
3
Separate the GREY foam lter
from the BLUE HEPA lter pack
using the tab provided.
Gently tap both lters against the
side of a bin to release excess
dust.
Wash the GREY foam lter
thoroughly under hand warm
water until the water runs clean.
Remove excess water by shaking
and leave to dry for 24 hours.
DO NOT USE HOT WATER
OR DETERGENTS.
4
Wash the BLUE HEPA lter
thoroughly from the inside under
hand warm water until the water
runs clean.
Remove excess water by
shaking and leave to dry for 24
hours. When completely dry
reassemble and refit filters to
cleaner.
DO NOT USE HOT WATER
OR DETERGENTS.
65
!
IMPORTANT! For optimum performance,
always keep your lters clean.
!
!
IMPORTANT! For optimum performance,
always keep your lters clean. We recommend
that the exhaust lter should be washed every
3 MONTHS.
IMPORTANT! For optimum performance, shake off excess dust from the lters regularly.
We recommend that the GREY foam lter and the BLUE hepa lter are washed every 3 MONTHS.
GB
