11
CHANGING THE BELT / AGITATOR
If your cleaner is not picking up efciently, the belt or brushes (or both) may need replacing, but rst please make
sure you have:
• Emptied the dust container
• Cleaned the lters
• Checked for blockages
CLEARING A BLOCKAGE
IMPORTANT:
Switch the cleaner off and remove the
plug from the electricity supply before dismantling
cleaner
IMPORTANT: Switch the cleaner off and remove the plug from
the electricity supply before dismantling cleaner
Remove the carpet care control knob. Turn
the cleaner over and remove 5 retaining
screws attaching the brush guard to the
base.
Turn the cleaner over and remove the hood.
Remove brush assembly and check for wear
on the belt. Loop the new belt around the motor
and brush assembly.
Hold the brush assembly and stretch the belt until the
brush can be slotted back into the cleaner housing.
Rotate the brush to ensure movement of the belt.
Refit the hood ensuring the lugs along the front are
located in the slots on the front edge of the baseplate.
Secure the hood with 5 retaining screws. Refit the
carpet care control knob.
1
2
3
4
5
6
If cleaning tools were in use
check the cleaning tool and
the removable handle.
Check the hose by removing it
from the cleaner, stretching it
to full length.
Turn the cleaner over and
rotate the brushes until they
are free to rotate.
Check for a blockage in
the hose socket. Use a
flexible rod to remove any
obstruction.
Open the pet hair or allergen
remover turbo brush at each
side, lift cover and remove
the blockage.
GB
