Bedienungsanleitung Hoover HOS 558 (Seite 9 von 9) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

595188

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

PYROLYSE

The oven is equipped with a pyrolyser cleaning system, which

destroys food residues at high temperature. The operation is carried

out automatically by means of the programmer. The resulting fumes

are rendered “clean” by passing over a Pyrolyser wich starts as

soon as cooking begins. As very high temperatures are required

by the Pyrolyser, the oven door is fitted with a safety lock.

The pyrolyser can be stopped at any time. The door cannot be

opened until the safety lock is displayed.

NOTA : if a hob has been fitted above the oven, never use the gas

burners or the electric hot-plates while the Pyrolyser is working,

this will prevent the hob from overheating.

THREE PYROLYTIC CYCLE are pre-set.

. ECO PYROCLEAN : cleans a moderately stained oven. Operates

at a temperature of 475°C for a period of 90 minutes.

. NORMAL PYROCLEAN : cleans a normaly stained oven. Operates

at a temperature of 475°C for a period of 105 minutes.

. SUPER PYROCLEAN : cleans an heavily stained oven. Operates

at a temperature of 475°C for a period of 120 minutes.

Never use commercially available cleaning products on a Pyrolytic

oven !

Tip : carrying out Pyrolytic cleaning immediately after cooking allows

you to take advantage of residual heat, thus saving energy.

Before carrying out a Pyrolytic cycle :

- Remove all accessories from the oven : they cannot withstand

the high temperatures and would be damaged by pyrolytic

temperatures.

- Remove any large spillages or stains as it would take too long

to destroy them. Also excessively large amounts of grease could

ignite when subject to the very high temperatures of the Pyrolytic-

cycle.

- Close the oven door.

Using the pyrolytic cycle :

1-Turn the function selector knob to “Pyrolytic Mode”.

2- By using the central button select the required Pyrolytic mode,

according the degree of staining :

.. ECO PYROCLEAN .. NORM PYROCLEAN .. SUPER PYROCLEAN ..

Confirm the choice by pressing the central button.

... the oven starts the pyrolytic cycle.

On the display, the time of the end pyrolytic cycle and the “time”

and “stop” indicator lights will appear.

During the pyrolytic cycle, the locking oven door appears, it indicates

that the door is locked. The cooling fan will operate.

The indicator light flashes until the temperature required is not

reached and then it becomes fixed.

* The start of the pyrolytic cycle can be delayed by selecting an

end of time. Turn the programmation control knob to the end of

time and set the end of time required.

At the end of the pyrolytic cycle the oven will automatically switch

off.

For 15 seconds,an audible signal lets you know that the cycle has

ended and the “time” and “Stop” indicator lights will flash.

. Turn the selector knob to STOP. Unless you do this, the symbols

will continue flashing.

The oven door will remain locked until the temperature is high. So,

as the locking oven door is light, the oven can not be opened.

The cooling fan does not switch itself off until the temperature of

the oven components is reasonable.

At the end of the cycle, the indicator flashes again and stays lighted

even if the oven is switched off. It disappears only when the

temperature is sufficiently low.

Pyrolysis leaves a white residue on the oven walls. Wait for the

oven to cool completely then clean the inside of the oven with a

damp sponge to wipe off the residue.

The electronic control system records all of the cooking settings

used and with frequent usage it will calculate the degree of dirt

build up and indicate the need for cleaning.

To begin the pyro cycle follow the above instructions.

At the end of the cleaning cycle the memory will automatically reset

itself.

24 GB

CHILD SAFETY

This function is essential, especially when children are around. It

prevents children from switching the oven on or altering the pre-

set programmes.

This safety system locks the oven control panel while it is operating.

There are two levels of safety :

LIVEL 1 : Locking selector control knob and the central button.

. To activate : turn the programmation control knob to child safety.

. Action : the control knobs are inactive*.

. To deactivate : turn the programmation control knob to 0.

LIVEL 2 : Locking function selector knobs

. To activate : turn the function selector knob to child safety and

keep the central button pressed in for 3 seconds.

. Action : all the controls are inactive*.

. To dactivate : the same procedure as for activating. Turn the

function selector knob to child safety and keep the central button

pressed in for 3 seconds.

*Nota : in all cases, for reasons of safety, even when the controls

are locked, the oven can be switched off by turning the selector

knob to 0.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hoover HOS 558 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info