Bedienungsanleitung Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver (Seite 8 von 16) (Englisch)

606947

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Important: Y-Harnesses and Servo Extensions

When using a Y-harness or servo extensions in your installation, it’s important

to use standard, non-ampliﬁed Y-harnesses and servo extensions. Ampliﬁed

Y-harnesses and servo extensions will cause the servos to operate erratically or

not function at all.

Setting the Failsafe Positions

The Receiver features two types of failsafe: SmartSafe and Preset Failsafe.

SmartSafe

™

failsafe is recommended for most aircraft.

When the transmitter and receiver are turned on, the receiver connects to the

transmitter and normal control of all channels occurs. If loss of signal occurs,

SmartSafe moves the throttle channel to its preset failsafe position (low throttle)

that was set during binding. All other channels hold their last position. When the

receiver detects signal from the transmitter, normal aircraft operation resumes.

Receiver Power Only

• WithSmartSafetechnologywhenthereceiveronlyisturnedon(no

transmitter signal is present), the throttle channel has no output, to avoid

operating or arming the electronic speed control.

• Allotherchannelsaredriventotheirpresetfailsafepositionssetduringbinding.

Range Testing

Before each ﬂying session and especially with a new model, it is important to

perform a range check. All Spektrum aircraft transmitters incorporate a range

testing system which, when activated, reduces the output power, allowing

a range check.

1. With the model restrained on the ground, stand 30 paces (approx. 90

feet/28 meters) away from the model.

2. Face the model with the transmitter in your normal ﬂying position and place

your transmitter into range check mode.

3. You should have total control of the model with the button depressed at 30

paces (90 feet/28 meters).

4. If control issues exist, contact the appropriate product support department.

Advanced Range Testing

For sophisticated models that have signiﬁcant conductive material in them, the

Advanced range test using a ﬂight log is recommended. The advanced range

check will conﬁrm that the internal and remote receivers are operating optimally

and that the installation (position of the receivers) is optimized for the speciﬁc

aircraft. This Advanced Range Check allows the RF performance of each receiver

to be evaluated and to optimize the locations of the remote receiver.

IMPORTANT: If you don’t have a telemetry-capable transmitter or an STi

™

interface, you can connect a Flight Log to the BIND/Prog port on the receiver.

1. Standing 30 paces away from the model, face the model with the transmitter in

your normal ﬂying position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info