Bedienungsanleitung Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver (Seite 10 von 16) (Englisch)

606947

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Flight Log (SPM9540 Optional)

The Flight Log is compatible with the AR636. The Flight Log displays overall

RF link performance as well as the individual internal and external receiver link

data. Additionally it displays receiver voltage.

ModelMatch

™

Technology

Some Spektrum and JR transmitters offer a patent pending feature called

ModelMatch. ModelMatch technology prevents the possibility of operating a

model using the wrong model memory, potentially preventing a crash. With

ModelMatch, each model memory has its own unique code (GUID) and during

the binding process the code is programmed into the receiver. Later, when

the system is turned on, the receiver will only connect to the transmitter if the

corresponding model memory is programmed on screen.

If at any time you turn on the system and it fails to connect, check to be sure

the correct model memory is selected in the transmitter.

Frequently Asked Questions on Spektrum 2.4GHz

1. Q: After I’ve bound the receiver to my transmitter, which do I turn

on ﬁrst when I want to ﬂy?

A: Either one. Every DSM 2.4GHz transmitter has a GUID (Globally Unique

Identifier) code imbedded in its signal. When you bind a DSM receiver

to your transmitter, this GUID code is stored in the receiver. If you turn

the receiver on before the transmitter, you don’t have to worry about it

responding to another transmitter. The receiver will go into failsafe mode

while it waits for a signal from the transmitter with the same GUID code

it has stored. See the Receiver Power Only section for more information.

If a DSM transmitter is turned on first you can expect it to connect within

6 seconds of powering on the receiver.

2. Q: Sometimes the system takes longer to connect or doesn’t

connect at all. Why?

A: In order for a DSM system to connect, the receiver must receive a large

number of uninterrupted signal packets from the transmitter. This process

takes just a few seconds, but if the transmitter is too close to the receiver

(within 4 feet) or near reflective material (metal objects, carbon fiber

material, etc.) it may detect its own reflected 2.4GHz energy as “noise”.

This can delay or prevent connection. If this happens, make sure you are

a sufficient distance from metal objects and the receiver itself before you

power up and try again.

3. Q: Is it true that DSM systems are less tolerant of low voltage?

A: All DSM receivers require at least 3.5V to operate normally. Most servos

cease to operate below 3.8V. Using multiple high-voltage servos with an

inadequate power supply can allow voltage to momentarily drop below

3.5V. This will cause the receiver to “brown out” and reconnect. See the

QuickConnect with Brownout Detection section for more information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Horizon Hobby AR636 - 6-Channel AS3X Sport Receiver

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info