Bedienungsanleitung Hormann HST - Side sectional door (Seite 8 von 136) (Alle Sprachen)

655857

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

2-piece frame LZ>5000

> 1000

Door with frame extension

Door with grid width

Door with intermediate width

LZ+285

Sliding door

Closing side

Door open

Door closed

Manual operation

Electrical operation

Optional components

Remove residue

Inspect

Remove and dispose of component or

packaging

1.2 Abbreviations used

OFF (FFL) Finished ﬂoor level

LZ Clear frame dimensions / ordering size

2 Safety Instructions

2.1 Intended use

This garage door is designed and intended for private use

only.

Continuous operation is not permitted.

2.2 General safety instructions

• Fitting, maintenance, repair and dismantling of the side

sectional garage door may only be carried out by

specialists (competent persons in accordance with

EN12635).

• In the event of a door failure (sluggish operation

orother malfunctions), a specialist must be

commissioned immediately for the inspection /

repairwork.

• The specialist must ensure that the respective

nationalregulations regarding occupational safety

arecomplied with.

• Before the door is put into service, check that it is in

aﬂawless mechanical condition, as well as correctly

balanced, so that it can be easily operated by hand

(EN12604).

• The ﬁeld of application for side sectional doors is laid

down in EN13241-1.

• When the door is ﬁtted, attention must be paid to

potential hazards as deﬁned in EN12604 and

EN12453.

2.3 Environmental conditions

ATTENTION

Damage due to temperature differences

Differences in the inside and outside temperatures may

cause deﬂection of the door elements (bi-metal effect).

This may result in damage when the door is operated.

▶

Comply with the operating conditions.

The door is intended for the following operating conditions:

Temperature:

• Exterior side – 40 °C to + 60 °C

• Interior side – 20 °C to + 60 °C

Relative humidity: 20 % to 90 %

3 Fitting

WARNING

Danger of injury as the result of structural modiﬁcations

Changing or removing functional parts may put important

safety components out of action. Uncontrolled door

travel could occur and persons or objects may be

trapped as a result.

▶

Do not alter or remove any functional parts.

▶

Do not attach any additional components of another

make.

▶

If equipping the door with an operator, pay attention

to the instructions provided by the manufacturers of

the door and operator. Only use the original

connections of the door manufacturer!

Before ﬁtting the door, the door opening and the building

ﬂoor must be completely ﬁnished. The door opening must

be horizontal and perpendicular, the building ﬂoor in the

area in which the door travels must be ﬂat and horizontal

(see Figure1).

Observe the following during ﬁtting:

• Establish a secure connection with the building

structure.

4004769 HST RE / 09.2015

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hormann HST - Side sectional door Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hormann HST - Side sectional door

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info