Bedienungsanleitung Hot Spring SOVEREIGN - II (Seite 20 von 48) (Englisch)

624652

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Page 17

LIGHTS CONTROL SCREEN

Press on the Home screen to access the primary Lights screen.

NOTE: If lights are off when

is pressed on the Home screen,

all light zones will turn on to blue.

The primary Lights screen is

divided into two sections, the

MOODS section and the ALL

LIGHTS section.

MOODS (Preset colors and brightness):

Press to turn On Underwater lights (blue color).

Press to turn On Underwater (magenta), Bartop Waterfall and

Pillow (aqua).

Press to turn On Underwater & Pillow lights (aqua).

Press to turn On Pillow lights (white).

ALL LIGHTS:

Press to turn all lights On or Off. When all lights are

turned On they will all be blue.

Press or to decrease or increase the

brightness setting for all lights that are currently on.

Press any of the color boxes to turn that color on in all

light zones.

Press the multicolored box to turn color wheel on for

all light zones. Press the color wheel a second time to

stop the color wheel at a desired color.

Press to advance to the secondary Lights screen.

Select the color and brightness

for each desired light zone.

NOTE: Different colors and

brightness settings can be

selected for each individual zone.

Press the button next to the zone description to select

the desired lighting zone (only one light zone can be

selected at a time).

Press or to decrease or increase the

brightness setting for selected light zone.

Press any of the color boxes to turn that color on in the

selected light zone.

Press the multicolored box to turn color wheel on for

selected light zone. If more than one zone uses the

color wheel, the colors will automatically synchronize.

Press the color wheel a second time to stop the color

wheel at a desired color.

DOCKING TRAY FUNCTION BUTTONS:

In the event the remote is not nearby, you can still operate the Jets and

Lights by pressing the buttons located in the docking tray.

LIGHTS Button:

Press the Lights button once to turn on all light zones in blue. Continue

pressing the Lights button to dim all lights until the 5th press turns them

off.

JETS Button:

Press the Jets button several times to turn each sequence of jet

combinations on followed by turning all jets Off

1st Press Jet 2 on low speed

2nd Press Jet 2 on high speed

3rd Press Jet 1 and 2 on high speed

4th Press Jet 1 on high speed, jet 2 on low speed

5th Press Jet 1 on High

6th Press All jets off

Pairing Dock with Remote:

Pairing is only required if the remote is within range of the dock and the

screen on the remote continues to read "Searching for Spa".

• Press and hold the JETS button on the dock until JETS and

LIGHTS buttons flash.

• Press and hold remote screen until Pairing Menu is displayed.

• Press Yes to begin the Pairing.

Changing Frequency Channel between Dock with Remote:

Change the channel if

remote continues having intermittent

response when inside the 30' usable range.

• Press and hold the LIGHTS button on the dock until JETS and

LIGHTS buttons flash.

• Press UP or DOWN on remote to change the channel number.

• Press OK to set the new frequency.

Operating Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hot Spring SOVEREIGN - II Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info