Bedienungsanleitung Hotpoint-Ariston LFD 11M132 (Seite 19 von 28) (Englisch, Italienisch)

570818

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Technical data

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 14 standard place-settings

Water supply pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

* Only available in selected models.

The control panel features a “Touch Control” system; press

the symbols lightly with your fingertips to activate the

command.

The machine has a buzzer/set of tones

(dependingon the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(dependingonthedishwashermodel)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Switching the appliance on for the first time

Selecting the language

SwitchonthemachineusingtheON/OFFbuttonandselectthe

desiredlanguageusingthebuttonsnexttothegreyarrows

(the

default language is English.)

Press the OK button to confirm the selection.

PresstheESCbuttontoexitorwaitafewseconds.

SETTINGS button

This button makes it possible to select:

logodisplay, volumeof buzzer/setof tones,language

selection, rinse aid adjustment, water hardness adjustment,

control panel lock.

Child safety lock

The control panel lock can be activated when the

dishwasher is switched on or when a cycle is in progress using

the“Lock”button.Pressagaintodeactivatethefunction.

UsetheSETTINGSbuttontoaccessthemenu.Thecontrolpanel

lockcanbeactivatedautomaticallyafter10/30secondsfrom

the cycle start.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack

(ifany).

Water softener settings

Before starting the first wash cycle, set the hardness lev-

el of the water from the mains supply.

(seechapterRinse

aid and refined salt).

Firstloadthesoftenertankwithwater,thenintroduceabout

1 kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALTindicatorlight* switches off.

If the salt container is not filled, the water softener and the

heating element may be damaged as a result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hotpoint-Ariston LFD 11M132 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hotpoint-Ariston LFD 11M132

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info