Bedienungsanleitung HP Designjet 4000 P-S (Seite 223 von 268) (Englisch)

724472

223

Zoom out

Zoom in

Vorherige Seite

1/268

Nächste Seite

The problem is I cannot access the Embedded Web

Server from my browser

If you have not done so already, please read “How do I access the Embedded Web

Server?” on page 75.

● Have you set a password for the Embedded Web Server, and then forgotten the

password? If so, select the

icon, then Configuration menu > Reset EWS

password.

●

At the printer's front panel, select the

icon, then Configuration menu > Allow

EWS. If this option is off, turn it on.

● Check that you have a TCP/IP (network or FireWire) connection to your printer. If

you connect directly to your printer with a USB cable, you cannot use the

Embedded Web Server.

● If you are using a FireWire connection, make sure that your computer's operating

system supports IP over IEEE-1394 (FireWire). For example, Windows XP and

Windows 2003 Server support IP over FireWire, but Windows 2000 does not.

Mac OS X 10.3 also supports IP over FireWire (see “How do I access the

Embedded Web Server?” on page 75). Make sure that your operating system is

configured to use IP over FireWire.

● At the printer's front panel, check that IP is enabled for the type of connection you

are using. Select the

icon, then I/O setup, then the type of connection you are

using, and check that you see IP enabled. If not, you may need to use a different

type of connection.

● If you normally access the Web through a proxy server, try bypassing the proxy

server and accessing the Web server directly. You can do this by modifying your

browser settings.

For instance, if you are using Internet Explorer 6 for Windows, go to Tools >

Internet Options > Connections > LAN Settings, and check the 'Bypass proxy

server for local addresses' box. Alternatively, for more precise control, click the

Advanced button and add the printer's IP address to the list of Exceptions for

which the proxy server is not used.

● Try switching off the printer (with the Power key on the front panel) and then

switching it on again.

The problem is an out-of-memory error

There is no direct relationship between the size of a file in your computer and the

amount of memory needed in the printer to print the file. In fact, because of file

compression and other complicating factors it is often impossible to estimate how

much memory will be needed. So it is possible that a print will fail for lack of memory

even though you may have successfully printed larger files in the past. In this case

you may need to consider adding more memory to your printer.

If you are using the Windows HP-GL/2 driver, you can often solve printer memory

problems by selecting the Services tab, then Troubleshoot software problems, then

Print job as a bitmap (process in computer).

Note If you select this option, the time needed to process the job in your

computer may be considerably longer.

221

The problem is something else

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Designjet 4000 P-S Seite 223

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Designjet 4000 P-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info