a. Open a command-line prompt on your computer. For Windows, click Start, click Run, type cmd, and
then press Enter.
b. Type
ping followed by the IP address for your product.
For Mac OS X, open the Network Utility, and then supply the IP address in the correct eld in the
Ping pane.
c. If the window dis
plays round-trip times, the network is working.
2. If the ping command f
ailed, verify that the network hubs are on, and then verify that the network
settings, the product, and the computer are all congured for the same network.
The product is using incorrect link and duplex settings for the network
HP recommends leaving these settings in automatic mode (the default setting). If you change these settings,
you must also change them for your network.
New software programs might be causing compatibility problems
Verify that any new software programs are correctly installed and that they use the correct print driver.
The computer or workstation might be set up incorrectly
1. Check the netw
ork drivers, print drivers, and the network redirection settings.
2. Verify that the operating system is congured correctly.
The pr
oduct is disabled, or other network settings are incorrect
1. Review the conguration page to check the status of the network protocol. Enable it if necessary.
2. Recongure the network settings if necessary.
102 Chapter 8 Solve problems ENWW
