Bedienungsanleitung HP LaserJet Pro MFP M377 - Color (Seite 79 von 154) (Englisch)

682159

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

1. Click Start, and then click Programs.

2. Click HP, click the name of the printer, and then click Scan to E-mail Wizard.

NOTE: If the Scan to E-mail Wizard option is not available, use

Method two: Set up the Scan to Email

feature via the HP Embedded Web Server (Windows) on page 69

3. In the Outgoing Email Profiles dialog, click the New button. The Scan to Email Setup dialog opens.

4. On the 1. Start page, enter the sender’s email address in the Email Address field.

5. In the Display Name field, enter the sender’s name. This is the name that will display on the printer

control panel.

6. To require a PIN to be entered on the printer control panel before the printer can send an email, enter a

4-digit PIN in the Security PIN field, and then re-enter the PIN in the Confirm Security PIN field, and

then click Next.

NOTE: HP recommends creating a PIN to secure the email profile.

NOTE: When a PIN is created, it must be entered on the printer control panel each time the profile is

used to send a scan to email.

7. On the 2. Authenticate page, enter the SMTP Server and Port Number.

NOTE: In most cases, the default port number does not need to be changed.

NOTE: If you are using a hosted SMTP service such as gmail, verify the SMTP address, port number,

and SSL settings from the service provider’s Web site or other sources. Typically, for gmail, the SMTP

address is smtp.gmail.com, port number 465, and the SSL should be enabled.

Please refer to online sources to confirm these server settings are current and valid at the time of

configuration.

8. If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS)

check box.

9. Select the Maximum Size of Email from the drop-down menu.

NOTE: HP recommends using the default file size of Automatic for the maximum size.

10. If the SMTP server requires authentication to send an email, select the Email Log-in Authentication

check box, and then enter the User ID and Password, and then click Next.

11. On the 3. Configure page, to automatically copy the sender on email messages sent from the profile,

select Include sender in all email messages sent out successfully from the printer, and then click

Next.

12. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error,

click the Back button to correct the error. If the settings are correct, click the Save and Test button to

test the configuration.

13. When the Congratulations message displays, click Finish to complete the configuration.

Method two: Set up the Scan to Email feature via the HP Embedded Web Server

(Windows)

●

Step one: Access the HP Embedded Web Server (EWS)

ENWW Set up the Scan to E-mail feature 69

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP LaserJet Pro MFP M377 - Color Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP LaserJet Pro MFP M377 - Color

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info