Bedienungsanleitung HP PSC-1417 (Seite 43 von 64) (Englisch)

480838

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

you might need to wait a few minutes for the HP All-in-One to connect to your computer.

Otherwise, see Some of the icons are missing in the HP Solution Center or HP Image Zone.

● Open the Printers dialog box and check to see that the HP All-in-One is listed.

● Look in the system tray at the far right of the Windows taskbar for an HP All-in-One icon.

This indicates that the HP All-in-One is ready.

When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens

Solution Double-click My Computer, double-click the CD-ROM icon, and then double-

click setup.exe.

The minimum system checks screen appears

Solution Click Details, and then correct the problem before attempting to install the

software.

A red X appears on the USB connect prompt

Solution Normally, a green check appears indicating that the plug and play is

successful. A red X indicates that the plug and play failed.

Do the following:

1. Verify that the control panel overlay is firmly attached, and then unplug the HP All-in-

One and then plug it in again.

2. Verify that the USB cable and power cord are plugged in.

– Do not attach the USB cable to a keyboard or non-powered hub.

– Verify that the USB cable is 3 meters (9.8 feet) or less in length.

– If you have several USB devices attached to your computer, you might want to

unplug the other devices during the installation.

3. Continue with the installation and restart the computer when prompted.

4. Then open HP Solution Center and check for the key components (Scan Picture,

Scan Document, and HP Image Zone).

5. If these key components do not appear, remove the software and then reinstall it. For

more information, see Uninstall and reinstall the software.

I received a message that an unknown error has occurred

Solution Try to continue with the installation. If that doesn’t work, stop and then restart

the installation and follow the directions on the screen. If an error occurs, you might need to

uninstall and then reinstall the software. For information, see Uninstall and reinstall the

software.

Some of the icons are missing in the HP Solution Center or HP Image Zone

If these buttons or icons (Scan Picture, Scan Document, and HP Image Zone) do not

appear, your installation might not be complete.

Solution If your installation is incomplete, you might need to uninstall and then reinstall

the software. Do not simply delete the HP All-in-One program files from your hard drive.

Make sure to remove them properly. For more information, see Uninstall and reinstall the

software.

The Digital Imaging Monitor does not appear in the system tray

Solution If the Digital Imaging Monitor does not appear in the system tray, start the

HP Solution Center to check whether or not the key components (Scan Picture, Scan

Document, and HP Image Zone) are there. For more information, see the Use the HP

Solution Center section of the HP Image Zone Help that came with your software.

User Guide 39

Troubleshooting information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP PSC-1417 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP PSC-1417

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info