Bedienungsanleitung HP TouchSmart TM2-2100 (Seite 28 von 129) (Englisch)

604812

Zoom out

Zoom in

Vorherige Seite

1/129

Nächste Seite

Step 1: Purchase high-speed Internet service

If you already have high-speed Internet service (DSL, cable, or satellite), begin with

Step 2: Purchase

and install a wireless router on page 18. If you do not have high-speed Internet service, follow these

steps:

1. Contact a local ISP to purchase high-speed Internet service and a DSL or cable modem. The ISP

will help set up the modem, install a network cable to connect your wireless computer to the modem,

and test the Internet service.

2. Your ISP will give you a user ID and password to access the Internet. Record this information and

store it in a safe place.

Step 2: Purchase and install a wireless router

Read this section carefully before you install the wireless router using the router manufacturer's

instructions and your wireless computer. If you need technical assistance during the router installation,

contact the router manufacturer.

NOTE: It is recommended that you temporarily connect your new wireless computer to the router by

using the network cable provided with the router. This will ensure that the computer can access the

Internet.

1. Be sure that the wireless light on the computer is white. If the wireless light is amber, press the

wireless key or wireless button.

2. During the router installation, the router manufacturer's software allows you to change the network

name (SSID) and enable security to protect the privacy of your wireless network. Many routers are

shipped with a default network name and with security disabled. If you change the default network

name or enable security during the router setup, record the information and store it in a safe place.

You will need this information when you configure the computer and any other existing computers

to access the router.

NOTE: If you do not enable security, an unauthorized wireless user can access the data on the

computer and use your Internet connection without your knowledge. For more information on

securing your wireless network, refer to the Wireless guide in Help and Support.

The Windows operating system also provides tools to help you set up your wireless network for the first

time. To use the Windows tools to set up your network:

▲

Select Start > Network and Internet > Network and Sharing Center > Set up a new connection

or network > Set up a new network. Then follow the on-screen instructions.

Step 3: Configure the computer to connect to the wireless network

1. Be sure that the wireless device is on (wireless light is white). If the wireless light is amber, press

the wireless key or wireless button.

2. Click the network icon in the notification area, at the far right of the taskbar.

3. Select a network to connect to.

4. Click Connect.

5. If the network is a security-enabled WLAN, you are prompted to enter a network security key, which

is a security code. Type the code, and then click OK to complete the connection.

6. Test the wireless network by opening your Web browser and accessing a Web site.

18 Chapter 2 Networking

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP TouchSmart TM2-2100 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP TouchSmart TM2-2100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info