Bedienungsanleitung HP TouchSmart TM2-2100 (Seite 30 von 129) (Englisch)

604812

Zoom out

Zoom in

Vorherige Seite

1/129

Nächste Seite

Using HP Mobile Broadband (select models only)

HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access

the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile

Broadband requires a network service provider (called a mobile network operator), which in most cases

is a mobile phone network operator. Coverage for HP Mobile Broadband is similar to mobile phone voice

coverage.

When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay

connected to the Internet, send e-mail, or connect to your corporate network whether you are on the

road or outside the range of Wi-Fi hotspots.

NOTE: Computers with WWAN capabilities only support landscape primary and portrait secondary

orientations.

HP Mobile Broadband supports the following technologies:

●

HSPA (High Speed Packet Access), which provides access to networks based on the Global

System for Mobile Communications (GSM) telecommunications standard.

●

EV-DO (Evolution Data Optimized), which provides access to networks based on the code division

multiple access (CDMA) telecommunications standard.

You may need the HP Mobile Broadband Module serial number to activate mobile broadband service.

The serial number is printed on a label inside the battery bay of your computer.

Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains

basic information about you, such as a personal identification number (PIN), as well as network

information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not

preinstalled, it may be provided in the HP Mobile Broadband information provided with your computer,

or the mobile network operator may provide it separately from the computer.

For information on inserting and removing the SIM, refer to

Inserting a SIM on page 20 and Removing

a SIM on page 21.

For information on HP Mobile Broadband and how to activate service with a preferred mobile network

operator, refer to the HP Mobile Broadband information included with your computer. For additional

information, see the HP Web site at

http://www.hp.com/go/mobilebroadband (US only).

Inserting a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM:

1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the

computer on by sliding the power switch. Then shut down the computer through the operating

system.

2. Close the display.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

5. Turn the computer upside down on a flat surface, with the battery bay toward you.

6. Remove the battery.

20 Chapter 2 Networking

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP TouchSmart TM2-2100 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP TouchSmart TM2-2100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info