604917
28
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
AU28
Installation
Single Cable Distribution enables the delivery of broadcast programming over a single cable to multiple users
eliminating the numerous cables required to support other electronics devices.
If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting.
Refer to the satellite antenna manual for details.
> Settings > Installation
1 Press the RED button and select SCD Antenna. Select OK to save and exit.
2Select Search Channels and press the OK button.
3 Select SCD Setting and press the OK button to set the channel(band) and frequency for this receiver.
Tuner1: Select from Channel 1~8.
• Frequency: The frequency is set based on the channel of tuner1.
Select OK.
4Select a satellite figure and press the OK button.
Satellite: The satellite is xed.
LNB Frequency: Select the LNB frequency.
Test Transponder: Check the signal status of each transponder and select the one with the best quality.
Select OK.
5Select Transponder under the activated satellite figure and press the OK button.
Select a value in the transponder list.
6Repeat the two steps above to set more satellites.
7Select Search and press the OK button. The found channels will be listed.
8When the search is completed, the channel switches automatically to the most recently tuned channel.
Note:
• Select User Dene to enter the options directly.
• Select Stop and press the OK button to stop the channel search.
All channels will be deleted if you change the antenna type.
The default password is 1234. If you have forgotten your password, please contact HUMAX Australia Customer
Service.
Search Channels [SCD Antenna]
MENU
Satellite
LNB Frequency
LNB Power
22Khz Tone
Test Transponder
Optus C1/D3 (156.0E)
Universal
On
O
12722, H, 22000, 2/3
1
2
3
4
Antenna Type
OK
Cancel
Fixed Antenna
SCD Antenna
Motor Antenna
Select your antenna type.
Antenna Type
Settings Installation (SCD Antenna)
OK
Search
Search
SCD Setting
Cancel
Search Option
Search Option
Transponder
-
Position 1
Satellite
-
SCD Setting
Tuner 1
Frequency
Channel 1
1210
Channel 1
Settings
Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Satellite Setting
OK
Cancel
Search Option
Strength
Quality
75%
80%
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Humax HDR-1003S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info