604917
29
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
AU29
Installation
You can set the position of the satellites when you use a motor antenna for efficient channel search.
> Settings > Installation
1Press the RED button and select Motor Antenna. Select OK to save and exit.
2Select Search Channels and press the OK button.
3 Select Motor Setting and press the OK button to set the motor type and location.
Motor Type:
DiSEqC1.2: General motor antenna using DiSEqC 1.2.
USALS: Motor antenna using USALS.
My Longitude: Enter the longitude and direction.
Direction: Select East or West.
My Latitude: Enter the latitude and direction.
Direction: Select North or South.
LNB Frequency: Enter the LNB frequency.
Select OK.
Note: When Motor Type is set to DiSEqC 1.2, both My Longitude and My Latitude are inactivated.
4Select Position Setting and press the OK button to set the antenna position for the selected satellites.
Satellite: Select the satellite.
Transponder: Select the transponder.
Motor Driving: Continuous – Step - Time
Driving Size: When motor driving is set to Step or Time, select one from1~127.
Go to Stored Position: Make the antenna turn toward the position of the selected satellite.
Fine-tune the position using the / button until the signal strength and quality reach the maximum level.
Store Current Position: Save the adjusted position.
Recalculate: Recalculates the positions of all satellites based on the position of current satellite.
Press the BACK button to save and return.
Note: When Motor Type is set to USALS, Motor Driving, Store Current Position and Recalculate are inactivated.
Search Channels [Motor Antenna]
MENU
1
2
3
Motor Setting
Antenna Type
OK
Cancel
Fixed Antenna
SCD Antenna
Motor Antenna
Select your antenna type.
Antenna Type
Settings Installation (Motor Antenna)
Search
Search Option
Transponder
-
Satellite
Motor Setting
Position Setting
Limit Setting
USALS
Settings
Installation (Motor Antenna) Search Channels
OK
Search
Cancel
Search Option
Motor Type
My Longitude
Direction
My Latitude
Direction
LNB Frequency
USALS
23.0E
East
36.5N
North
Universal
Settings Installation (Motor Antenna) Search Channels
4
Satellite
Transponder
Motor Driving
Driving Size
Optus C1/D3 (156.0E)
12722, H, 22000, 2/3
Continuous
1
..
Installation (Motor Antenna) Search Channels Position Setting
West
East
Strength
Quality
75%
80%
Go to Stored position
Store Current Position
Recalculate
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Humax HDR-1003S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info