Bedienungsanleitung Humminbird 858C (Seite 87 von 160) (Englisch)

522346

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Introduction to Navigation

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK

key to save the current position of the boat as a waypoint.

Save the cursor position as a waypoint: On the Chart or Combo View, use

the 4-WAY Cursor Control key to move the cursor to the position you want to

save as a waypoint. Then press the MARK key to save the position as a

waypoint.

Save a position from the sonar history: On any Sonar View, use the 4-WAY

Cursor Control key to move the cursor to a feature in the sonar history. Press

the MARK key to create a waypoint at the location where that sonar reading

was taken. The new waypoint will also record the depth at that location.

Display the Waypoints Submenu: From any view, press the MENU key

twice to display the Main Menu, then use the RIGHT Cursor key to select the

Navigation tab. Select Waypoints, and press the RIGHT Cursor key to display

the Waypoints submenu.

Program a specific position as a waypoint: To create a waypoint that is

NOT your current position, from the Waypoints submenu select Create, and

press the RIGHT Cursor key. Use the 4-WAY Cursor Control key to program a

waypoint name, latitude, longitude, and icon before selecting Save.

Edit a waypoint: From the Waypoints submenu, select Edit and press the

RIGHT Cursor key to display the saved waypoints list. Select the waypoint

you want to edit and press the RIGHT Cursor key. Use the 4-WAY Cursor

Control key to edit a waypoint name, latitude, longitude, and icon before

selecting Save.

To make it easier to select a waypoint to edit, select Sort By and press the

RIGHT or LEFT Cursor keys to select a sort order:

• Name shows the waypoints alphabetically.

• Time shows the most recently-created waypoint first.

• Distance shows the closest waypoint first.

NOTE: When you save a waypoint by any of these methods, a numerical

waypoint name is automatically assigned. You can edit the waypoint

information later to give it a different name and select an icon to represent

it (see Program or Edit the waypoint fields).

Program or Edit the waypoint fields: Use the 4-WAY Cursor Control key to

move from field to field, and the UP and DOWN Cursor keys to change

values once you are in a field.

In the Waypoint Name, Latitude, and Longitude fields, press the UP and

DOWN Cursor keys to change the letter or number. All upper and lower

case letters are available, as well as digits 0-9 and some punctuation

characters.

In the Waypoint Icon field, press the UP and DOWN Cursor keys to change

the icon used to represent the waypoint on the Combo and Chart Views.

You can exit these fields with the LEFT and RIGHT Cursor keys or by

pressing the EXIT key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Humminbird 858C Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info