Bedienungsanleitung Humminbird 858C (Seite 89 von 160) (Englisch)

522346

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Introduction to Navigation

NOTE: Only one waypoint can have either a target or a grid applied to it at one

time. If you apply a target or a grid to a new waypoint, the original waypoint will

lose its target or grid.

NOTE: The spacing of the rings on the waypoint target and the spacing of the

grid lines on the trolling grid are the same as the length of the scale bar on the

left edge of the display. Zooming in or out will decrease or increase the spacing,

respectively.

Save, Edit or Delete a Route

Save the current route: While you are navigating, the current route can be

saved. From the Navigation X-Press™ Menu, select Save Current Route, and

press the RIGHT Cursor key. Navigation will continue.

Create a route: From the Routes submenu, select Create and press the

RIGHT Cursor key. A Route Edit dialog box will be displayed with an empty

route. You can name the route, add waypoints to the route from the saved

waypoints list, and order the waypoints in the route using the 4-WAY Cursor

Control key to move between fields.

Edit a saved route: From the Routes submenu, select Edit and press the

RIGHT Cursor key. A Route Edit dialog box will be displayed. Select the route

you want to edit and press the RIGHT Cursor key. Re-name the route or

change, delete, or re-order the waypoints used in the route.

Edit waypoint order in a route: From the Route Edit dialog box, highlight a

waypoint in the In Route list, and press the RIGHT Cursor key to access the

Waypoint In Route submenu. From this submenu, you can move the

waypoint up or down in the route order or delete it from the list.

Delete a saved route: From the Routes submenu, select Delete and press

the RIGHT Cursor key. Select the route you want to delete and press the

RIGHT Cursor key. You will be asked to confirm your choice by pressing the

RIGHT Cursor key again before the route is deleted.

Travel a saved route: From the Routes submenu, select Travel, and press the

RIGHT Cursor key. The saved routes list will appear. Select the route you

want to travel, and press the RIGHT Cursor key to make this route the current

route and begin navigation. You may also travel the route in forward or

reverse order by changing the Direction setting in the saved routes list.

Route Info: From the Routes submenu, select Info, and press the RIGHT

Cursor key. The saved routes list will appear. Select a route, and press the

RIGHT Cursor key. The following information will be displayed for the route

you select: The waypoints in the route, with the distance and bearing from

each waypoint to the next, as well as the distance and bearing from the

current position to the first waypoint in the route.

Display the Routes submenu: From any view, press the MENU key twice

to display the Main Menu, then press the RIGHT Cursor key to select the

Navigation tab. Press the DOWN Cursor key until Routes is highlighted,

and press the RIGHT Cursor key to display the Routes submenu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Humminbird 858C Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info