Bedienungsanleitung Hunter ACC (Seite 24 von 100) (Englisch)

685907

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ACC can therefore run automatic programs, manual

station and programs, and ICR commands simultaneously.

Each running event will be shown on the display with

the reason for running (programs will be shown with the

program letter followed by “ICR” if they were started by

the remote), and the remaining time for the event.

The display shown here is possible with ACC: six events

are running, including ICR station starts (ICR), ICR

program starts (A-ICR), manual single-stations (MAN),

manual program starts (C-MAN), and an automatic

program (D-AUTO).

Figure 3

If simultaneous operation is not desired, press the

Off button on ICR before starting another program or

station. Off will stop everything the controller is running,

regardless of what started it.

Stacking and SmartStack rules are not observed when

manual single station ICR commands are sent to the ACC.

Stacking and SmartStack rules do apply when manual

program ICR commands are sent to the ACC. If a program

is not set to overlap, the ICR command will be ignored

when trying to start the manual program.

ICR manual single station commands will be obeyed

if the controller is in the OFF position, or in a sensor

shutdown mode. ICR manual program commands will

NOT be obeyed and will be ignored in the OFF position. If

the controller is in a sensor shutdown mode and an ICR

command is sent to activate a program, the ACC will obey

the sensor shutdown if that program is assigned to pause

or suspend according to the sensor. The manual program

ICR command will be shown in the display as in pause or

suspend mode, depending on how you have your sensor

programmed. (Fig 3) If the program that you are trying to

manually start with an ICR command is not programmed

to pause or suspend a sensor, the command will be obeyed

and the program will run.

If you are utilizing a simultaneous station group, or SSG,

you may run an individual station that is included in the

SSG. The fact that the station is included in the SSG will be

ignored, and you may run that station by itself.

ConneCTInG To Imms .................................................................

hunTer IrrIGaTIon manaGemenT and monITorInG sysTem

ACC controllers can upgraded to provide full two-way

communications with central control software (IMMS 2.0).

The ACC Com modules are installed in place of the logo

badge on wall mount controllers, and under the facepack

door in a special bracket (APPBRKT) in pedestal units.

ACC controllers can be connected with hardwired cable

(GCBL), dial-up telephone (POTS or “plain old telephone

service”), or GSM cellular communications (using Circuit

Switched Data or CSD).

Multiple controllers can share a connection, with

additional runs of hardwired cable or UHF radio

communications. Advance to Daylight Saving and use +/-

to select YES.

No tee splices are permitted within the GCBL and all

hardwired devices must be in one single continuous wire

run.

DIAL-UP TELEPHONE (ACC-COM-POTS)

Connection must be within 6 ft (2 m) of the telephone

company connection, via standard RJ-11 jack..

IMMS 2.0 and dial-up Com modules require analog lines

with dial tone. These products do not have digital dialing

capabilities.

Dial-up must be via dedicated line. The controller will

always answer on the first ring and must not share with

fax machines or other devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hunter ACC Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hunter ACC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info