Bedienungsanleitung Hunter X-Core (Seite 14 von 36) (Englisch)

685865

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The X-Core

is compatible with the Solar Sync and Wireless Solar Sync

systems. Solar Sync is a sensor system that will automatically adjust

the X-Core controller’s watering schedule (based on changes in local

climate condition) by using the Seasonal Adjust function. The Solar

Sync uses a solar and temperature sensor to determine evapotrans

piration (ET), or the rate at which plants and turf use water, and also

includes Hunter Rain-Clik

and Freeze-Clik

technology that will shut

down irrigation when it rains and/or during freezing conditions.

NOTE: Solar Sync will apply a default seasonal adjust

value of 100% until the rst full day (24 hour period) of

weather measurements have been received from the

sensor.

NOTE: Enabling the Sensor Bypass switch has no eect

on the seasonal adjust updates from the Solar Sync

sensor. It will, however, bypass the Rain Clik and Freeze

Clik functionality of the sensor.

Installing Solar Sync Sensor

Connect the Green and Black wire from the Solar Sync Sensor to the

“SEN” wiring terminals on the X-Core controller, similar to picture on

page 11. It does not matter which wire connects to which terminal. Turn

the dial to the “Solar Sync Settings” position. The display will initially

show dashed lines and then will show the default Region setting (3)

on the le and the default Water Adjustment setting (5) on the right.

Adjust the Region as needed by using the

and buttons (refer to page 13 for

explanation of Solar Sync Region setting).

Use the button to advance to the right to

adjust the Water Adjust setting as needed

(see page 14 for explanation of Water Adjust setting).

Installing the Wireless Solar Sync

Connect the Green and Black wire from the Wireless Solar Sync

Receiver to the “SEN” wiring terminals on the X-Core controller. It does

not matter which wire connects to which terminal. Turn the dial to the

“Solar Sync Settings” position. The display will initially show dashed

lines and then will show the default Region setting (3) on the le and

the default Water Adjustment setting (5) on the right. Adjust the

region as needed by using the

and buttons (refer to page 13 for

explanation of Solar Sync Region setting). Use the button to advance

to the right to adjust the Water Adjust setting as needed (see page 14

for explanation of Water Adjust setting).

Solar Sync Settings

Once the Solar Sync sensor is connected

to the X-Core controller, two numbers

will appear in the display when the dial is

turned to the Solar Sync Settings position.

The number on the le of the screen is the

Region setting, and the number on the

right on the screen is the Water Adjustment setting (as shown above).

CONNECTING A HUNTER SOLAR SYNC

ET SENSOR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hunter X-Core Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hunter X-Core

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info