685865
16
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
14
Water Adjustment
The Water Adjustment is a 1 to 10 scale that allows for easy adjustment
of the Seasonal Adjust value from the Solar Sync ET Sensor. Upon
installation of the Solar Sync ET Sensor, it is recommended that the
Water Adjustment setting stay at the default value of 5. However, aer
installation, if you nd that the seasonal adjust value is lower or higher
than expected, the Water Adjustment value can be modied to modify
the Seasonal Adjust output value. See Calibration/Setup on page 15 for
explanation of how to use Water Adjustment scale to ne tune seasonal
adjust output value.
NOTE: If an individual zone is “wetter” or “drier” than
the rest of the system, simply increase or
decrease the amount of run time on the controller.
Uninstalling a Solar Sync
Sensor
If a Solar Sync sensor has been installed on the X-Core
controller then
the seasonal adjust value used by the controller will be calculated from
the weather data supplied by the Solar Sync sensor. If it is decided that
the Solar Sync sensor will no longer be used with the X-Core controller,
it must be uninstalled. If the Solar Sync sensor is not uninstalled, the
controller will not allow the seasonal adjust value to be manually
changed. For example, if the seasonal adjust value shown on the
controller was 50% when the Solar Sync sensor was removed, it will
remain 50% until the Solar Sync sensor is uninstalled.
To uninstall the Solar Sync sensor, simply disconnect the green and
black wires from the controller terminal and then turn the dial to
the “Solar Sync Settings” position. The display should show dashes,
indicating that the controller no longer recognizes the Solar Sync sensor
for calculation of seasonal adjustment. Now the seasonal adjust value
can be changed manually by turning the knob to the “Seasonal Adjust”
position and using the
or button to adjust the value.
CONNECTING A HUNTER SOLAR SYNC
®
ET SENSOR
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hunter X-Core wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hunter X-Core

Hunter X-Core Bedienungsanleitung - Deutsch - 36 seiten

Hunter X-Core Bedienungsanleitung - Holländisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info