Bedienungsanleitung Hurom H320N Series (Seite 10 von 13) (Englisch)

785960

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

When the Screw Stops during Operation

01 For 2 to 3 times, repeat the process of pressing

the operation switch in the [REV] direction for 3

to 5 seconds and then releasing it. The reverse

rotation [REV] is a function that returns and lifts the

ingredients upward. It only works when the switch is

being pressed in the [REV] direction, and the screw

rotation stops when the switch is released.

02 After the screw is completely stopped after

reverse rotation, press the operation switch in the

[ON] direction to start the operation again.

When operating the extraction [ON] or reverse

rotation [REV] function, completely stop the screw

first and then operate the switch in the direction of

the function to be operated next.

Note

If it does not work even after following the above

steps, unplug the power cord from the outlet,

remove the chamber set, wash it, and use it again.

The motor will continue to spin after the machine

is turned off but it will slow down and come to a

complete halt.

누름

정회전

역회전

작동스위치 정회전

역회전

누름

정회전

역회전

작동스위치 정회전

역회전

정회전

역회전

정지상태

작동스위치 정회전

역회전

off(정지) 정지

01 Open the hopper cover.

① Press the lever of the hopper cover to open it.

Overloading the product with ingredients may

damage the product.

02 Add the juicing ingredients below the limit mark

of the hopper.

① Use soft ingredients by mixing them with others.

03 Close the hopper cover and keep the juice cap

open.

① Before pressing the extraction switch [ON], put a

juice cup in place first.

② The juice can flow backwards into the hopper if

the juice cap is closed. If the juice does not come

out even after opening the juice cap, then open the

hopper cover and remove the content.

04 Press the operation switch [ON] to start

operation.

① The "click" sound when the product is operating

is the sound of the chamber set and the motor

binding together.

05 To add more ingredients during operation, use

the additional inlet or open the hopper cover.

① Operation stops when the hopper cover is open.

② Do not use anything other than the designated

pusher.

③ In case the ingredients spin but fail to be ground up

in the hopper during extraction, use the pusher to

press the ingredients down.

06 Let the machine operate for about 1 more minute

after all ingredients go down in the hopper.

① It slowly presses and squeezes the ingredients so it

takes some time until the last ingredient is juiced.

② Removing the remaining pulp by additionally

operating the machine after extraction makes it

more convenient to detach the hopper and clean

the parts.

07 Once the juicing and pulp removal are finished,

press the power switch to stop the machine.

① The machine stops 3 seconds after it is stopped by

pressing the power switch.

08 Pour any remaining juice by tilting the chamber

forward.

① For thickly concentrated juice made of tomatoes,

etc., the juice may still remain in the chamber.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hurom H320N Series Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hurom H320N Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info