Bedienungsanleitung Hurom H320N Series (Seite 12 von 13) (Englisch)

785960

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

01. A "click" sound is heard when

the product begins to operate.

It is the sound of the motor and the screw binding together. It is not considered to be

a malfunction.

02. It does not operate only with

the product body.

Check if the chamber set and product body are properly assembled. Make sure to

turn the power off when assembling or disassembling the product.

03. Assemble it so that it is

aligned with the safety sensor.

Check if it is assembled in accordance with the guide mark. Make sure to turn the

power off when assembling or disassembling the product.

04. It does not work.

Check if the power cord is properly inserted. The machine may not work after a long

period of (30 minutes or longer). It will operate normally after the heat of the product

body (motor) cools down.

05. It stops during a normal

operation.

Check if the hopper is properly assembled. If the hopper is assembled incorrectly, the

product will not work. It will operate only when the lock symbol on the chamber and

the hopper's assembly guide mark are assembled in a way that they face each other.

Check if the product is assembled according to the steps specified in the assembly

guide. Refer to the assembly guide page (page 06). Haven't an excessive amount of

ingredients or extremely thick ingredients inserted? Refer to Page 09 of the manual

to activate a reverse rotation.

For safety, a timer, which automatically stops after about 5 minutes from the start of

operation, is set. Press the switch again briefly to start operation.

06. There are crack marks

caused by a Multi-screw or

scratch marks at the top of the

Multi-screw.

In the process of making the molding, curve-shaped marks are created on the sides

and top of the Multi-screw in addition to the straight-lined mold marks. They are

normal parts and do not affect the operation at all.

07. Juice leaks through the pulp

outlet immediately after the

ingredients are inserted.

Depending on the inserted ingredients, small amounts of juice may leak through the

pulp outlet.

This is not a product defect but, rather, a phenomenon caused by the characteristics of

the ingredients. The leakage will stop once the product starts running. If the leakage

continues, contact the Customer Service Center.

08. Juice flows back into the

hopper.

Did you extract juice with the juice cap closed? When juicing with the juice cap

closed, the juice may flow backward into the hopper. If the contents are not sufficiently

discharged even after opening the juice cap again, open the hopper cover and empty

out the contents.

09. Juice leaks between the

hopper and the chamber, or

between the chamber and the

product body.

Is the hopper packing or chamber packing assembled correctly? The juice will

leak if the hopper packing or chamber packing has been assembled upside-down or

incompletely. Check if the packing is assembled properly.

10. The hopper does not open.

There may be excessive pulp remaining inside. Operate the produce to discharge the

pulp inside or repeat the process of activating a reverse rotation for about 10 seconds

and then stopping 2 to 3 times. Then, the hopper will open without any issue.

Weren't any foreign substances or solid matters (hard seeds such as persimmon

seeds) inserted? If any foreign substances or solid matters are inserted, parts may be

damaged more seriously when attempting a reverse rotation so contact the Customer

Service Center and request for after-sales service.

11. The chamber shakes (during

extraction).

Slight shaking may occur due to the kinetic force of the motor inside the product body.

Slight and notable motions occur depending on the ingredients characteristics (hard,

tough, etc.). This is a common phenomenon that happens when the screw rotates, and

it is not considered to be a malfunction. The shaking may seem relatively greater when

juicing hard ingredients than when juicing soft, succulent ingredients.

(e.g.: Carrots, potatoes, white radishes, beets, kohlrabi, etc.)

12. The discharge cover is closed

but the pulp is discharged.

Even if the lever is closed, pulp will be discharged naturally. Depending on the

ingredients used, there may be a difference in the amount and speed of discharge.

13. An unusual noise is heard

while juicing.

It is a natural sound produced when ingredients are being crushed. If the ingredients

are hard or tough like apples, carrots, cabbage, celery, beets, etc., the extraction noise

may be louder than that heard when juicing softer ingredients.

10. Before Requesting Repair

Check the following before asking for repair. For follow-up service and any inquiry you may have while using

the product, please contact our Customer Center, or homepage at http://www.globalhurom.com Check the

manufacturer’s number or the number under the barcode when requesting for follow-up service or parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hurom H320N Series Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hurom H320N Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info