734089
9
Zoom out
Zoom in
Vorherige Seite
1/332
Nächste Seite
H
Harness release function
WARNING:
Do not use the harness if the
release function is defective. Make sure that
the harness release function operates
correctly when you adjust the product.
The harness release function is at the front of the
product. The harness straps must always stay at the
correct position (Picture 23). In an emergency, the
harness release function helps you to safely release
from the product.
Muffler
Do not use an engine with a damaged muffler. A
damaged muffler increases the noise level and the
risk of fire. Keep a fire extinguisher near.
Examine regularly that the muffler is attached to the
product.
Do not touch the engine or the muffler when then
engine is on. Do not touch the engine or the muffler
for a while after the engine stops. Hot surfaces can
cause injuries.
A hot muffler can cause a fire. Be careful, if you use
the product near flammable liquids or fumes.
Do not touch the parts in the muffler, if the muffler is
damaged. The parts can contain some carcinogenic
chemicals.
Locknut
The locknut is used to lock some types of cutting
attachment (Picture 24).
When you install the locknut, tighten it in the opposite
direction to operation direction of the cutting attachment.
Cutting attachment
Do the regular maintenance. Let an approved
service center regularly examine the cutting
attachment to do adjustments or repairs.
The performance of the cutting attachment
increases.
The life of the cutting attachment increases.
The risk of accidents decreases.
Only use an approved cutting attachment guard. For
more information, see
#
.
Do not use a damaged cutting attachment.
Grass trimmer head
Make sure that you wind the grass trimmer line
tightly and equally around the drum to decrease the
vibration.
Use only the approved grass trimmer heads and
grass trimmer lines. See
#
.
Use a correct length of the grass trimmer line. A long
grass trimmer line uses more engine power than a
short grass trimmer line.
Make sure that the cutter on the cutting attachment
guard is not damaged.
Soak the grass trimmer line in water for 2 days
before you attach the grass trimmer line to the
product. This increases the life of the grass trimmer
line.
Grass blades and grass cutters
Use the product with an approved grass blade. Do
not use a grass blade without proper installation of
all required parts. Make sure that the installation is
done correctly and that the proper parts are used.
Inproper installation may cause the blade to fly off
and seriously injure the operator or the bystanders.
Wear protective gloves when you handle or do
maintenance on the blade.
Use head protection when you operate a product
with a grass blade.
Grass blades and grass cutters are used to cut
rough grass.
A grass blade can cause injury while it continues to
spin after the engine is stopped or the throttle trigger
is released. Make sure that the grass blade has
completely stopped rotating before any
maintenance.
Stop the engine before you do work on the cutting
attachment. Make sure the cutting attachment fully
stops. Disconnect the lead from the spark plug.
Only use an approved cutting attachment or a
correctly sharpened blade.
Keep the teeth of the blade correctly sharpened
(Picture 48).
Do not use a damaged cutting attachment.
Attach the transport guard to the grass blade when
you transport or store the product.
Blade thrust
A blade thrust is a sudden movement of the product
to the side, forward or rearward. A blade thrust
occurs when the grass blade or saw blade hits an
object that cannot be cut. In areas where it is not
easy to see the material being cut the risk of blade
thrust increases.
When a blade thrust occurs, there is a risk that the
product or the operator moves out of position. A
blade that moves can hit bystanders and there is a
risk of injuries.
If a blade is bent, has cracks, is broken or damaged,
discard the blade.
Use a sharp blade. The risk of blade thrust increases
when a blade is not sharp.
Fuel safety
Do not start the product if there is fuel or engine oil
on the product. Remove the unwanted fuel/oil and let
the product dry. Remove unwanted fuel from the
product.
191 - 002 -
9
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna 129R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info