Bedienungsanleitung Husqvarna 136LiHD45 (Seite 11 von 214) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

579184

Zoom out

Zoom in

Vorherige Seite

1/214

Nächste Seite

GENERAL SAFETY PRECAUTIONS

English – 11

Power trigger on front handle

The power trigger on front handle is designed to prevent

accidental operation. It is necessary to press both the

power trigger on the front handle and the power trigger on

the rear handle. The order actuation power trigger front

handle and power trigger on the rear handle doesn’t

matter. When you release the handle, the power trigger on

the rear handle and the power trigger on the front handle

both move back to their original positions. This movement

is operated by independent springs. This arrangement

means that the power trigger on the rear handle is

automatically locked at no operation state.

Turn on the machine. Press the power trigger on the front

handle.

(Figure 6)

Then press the power trigger on the rear handle up to

apply full power.

(Figure 7)

Release the power trigger on the rear handle and check

thereby the free back movement of the power trigger. The

cutting unit must stop within 1 second.

Restart the machine and release the power trigger on the

front handle on the front handle. Check that the power

trigger lockout returns to its original position when you

release it. The cutting unit must stop within 1 second.

Hand guard

The hand guard prevents hands from coming into contact

with the moving blades, for example, if the operator loses

grip on the front handle.

(Figure 9)

Check that the hand guard is ﬁtted correctly. Check that

the hand guard is undamaged.

Blade and blade guard

The outer part of the blades (1) is shaped as blade

guards.

(Figure 9)

Check that the blade guard is not damaged or distorted.

Replace the cutting unit if it is bent or damaged. The term

”power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power

tool.

Battery and battery charger

This section describes the battery and battery charger

safety for your battery product.

Only use Husqvarna original batteries for Husqvarna

products and only charge them in an original battery QC

charger from Husqvarna. The batteries are software

encrypted.

Use only a Husqvarna original BLi battery in your

machine.

Battery safety

The rechargeable Husqvarna batteries, BLi, are

exclusively used as a power supply for the relevant

Husqvarna cordless appliances. To avoid injury, the

battery must not be used as a power source for other

devices.

(Figure 2)

• Use the battery in surroundings where temperatures

are between -10

°C and 40 °C.

• Do not expose the battery to microwaves or high

pressure.

• Never clean the battery or the battery charger with

water. See also instructions under the Maintenance

heading.

• Store the battery out of reach of children.

• Protect the battery from rain and wet conditions.

Battery charger safety

Only use Chargers, Husqvarna QC, for charging the

Husqvarna replacement batteries, BLi.

(Figure 3)

WARNING! Protect the battery from

direct sunlight, heat or open ﬂame. There

is a risk the battery may explode if it is

thrown into an open ﬁre. There is a risk of

burns and/or chemical burns.

WARNING! Avoid all skin contact with

battery acid. Battery acid may cause skin

irritation, burns or corrosive injuries. If

you get acid in your eyes, do not rub but

ﬂush your eyes with plenty of water for at

least 15 minutes. See a doctor. You must

wash any exposed skin with copious

amounts of water and soap in case of

incidental contact.

WARNING! Never connect the battery

terminal to keys, coins, screws or other

metal as this may short-circuit the

battery. Never insert objects into the

battery's air vents.

Unused batteries must be kept away from

metal objects such as nails, coins,

jewellery. Do not try to disassemble or

crush the battery

WARNING! Minimise the risk of electric

shock or short circuit as follows:

Never insert any object into the charger’s

cooling slots.

Do not try to dismantle the battery

charger.

Never connect the charger terminals to

metal objects as this can short circuit the

battery charger.

Use approved and intact wall sockets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 136LiHD45 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info