Bedienungsanleitung Husqvarna 136LiHD45 (Seite 13 von 214) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

579184

Zoom out

Zoom in

Vorherige Seite

1/214

Nächste Seite

BATTERY HANDLING

English – 13

Battery status

The display shows the battery capacity and if there are

any problems with the battery. The battery capacity is

displayed for 5 seconds after the machine is switched off

or the battery indicator button (1) is pressed. The warning

symbol on the battery is lit when an error has occurred

(2). See fault codes. (Figure 26)

Battery charger

Connect the battery charger

• Connect the battery charger to the voltage and

frequency speciﬁed on the rating plate. Put the

electric plug in a earthed socket-outlet.

• The battery will not be charged if the battery

temperature is over 50

°C.

Connect the battery to the battery charger

Regularly check that the battery charger and the battery

are intact. See also instructions under the Maintenance

heading.

The battery must be charged before using it the ﬁrst time.

The battery is only 30% charged when delivered.

• Connect the battery to the battery charger (Figure 14)

• The green charging light on the charger is lit when the

battery is connected to the battery charger. The

charging process is ongoing.

(Figure 13)

• When all the LEDs are lit on the battery, it is fully

charged.

(Figure 12)

• Pull out the plug. Never jerk the power supply cable to

disconnect it from the wall socket.

• Disconnect the charger from the battery.

Charging status

Lithium-ion batteries can be charged at whatever

charging level. The charging process can be cancelled or

started whatever the battery’s charge level is. A fully

charged battery will not lose its charge even when the

battery is left in the charger.

(Figure 27)

Transport and storage

• The contained lithium-ion-batteries are subject to the

Dangerous Goods Legislation requirements.

• For commercial transports e.g. by third parties,

forwarding agents, special requirement on packing

and labeling must be observed.

• For preparation of the item being shipped, consulting

an expert for hazardous material is required. Please

also observe possibly more detailed national

regulations.

• Tape or mask off open contacts and pack up the

batteriy in such a manner that it cannot move around

in the packing.

• Always remove the battery for storage or transport.

• Store the battery and the battery charger in a dry,

moisture-free and frost-free space.

• Do not store the battery in places where static

electricity can occur. Never store the battery in a metal

box.

• Store the battery and the battery charger where the

temperature is between 5

°C and 45 °C and never in

direct sunlight.

• Store the battery charger only in an enclosed and dry

space.

• Be sure to store the battery separate from the battery

charger. Store the equipment in a lockable area so

that it is out of reach of children and unauthorized

persons.

• Ensure the machine is cleaned and that a complete

service is carried out before long-term storage.

• The transport guard must always be ﬁtted to the

cutting attachment when the machine is being

transported or in storage.

• Secure the machine during transport.

LED lights Battery status

All LEDs are lit Fully charged (75-100%).

LED 1, LED 2, LED 3 are lit.

The battery is 50%-75%

charged.

LED 1, LED 2 are lit.

The battery is 25%-50%

charged.

LED 1 is lit.

The battery is 0%-25%

charged.

LED 1 ﬂashes.

The battery is empty.

Charge the battery.

WARNING! Risk of electric shock and

short circuiting. Use approved and intact

wall sockets. Make sure that the cable is

not damaged. Replace cable if it appears

to be damaged in any way.

LED display Charging status

LED 1 ﬂashes.

The battery is 0%-

25% charged.

LED 1 is lit, LED 2 ﬂashes.

The battery is 25%-

50% charged.

LED 1, LED 2 are lit, LED 3 ﬂashes.

The battery is 50%-

75% charged.

LED 1, LED 2, LED 3 are lit, LED 4

ﬂashes.

Battery is 75%-

100% charged

LED 1, LED 2, LED 3, LED 4 are lit.

When all the LEDs

are lit on the battery,

it is fully charged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna 136LiHD45 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info