Bedienungsanleitung Husqvarna Automower 320 NERA - 2024 (Seite 22 von 52) (Englisch)

819076

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4.2.2 TargetHeight

Use the TargetHeight function to lower the cutting height

from the maximum cutting height to the specified cutting

height gradually during 10 days. If you change the

cutting height manually during this time it will disable the

TargetHeight function.

4.3 Operation

Operation

you can change the operation settings of

the product.

4.3.1 Spiral cutting

Spiral cutting is only applicable for work areas with

irregular pattern. If the product enters an area where it

senses the grass is longer than average, it can change

the movement pattern to

Spiral cutting

. This means that

the product mows in a spiral pattern to faster cut the

area with longer grass. It is possible to set the intensity

of the

Spiral cutting

Very low / Low

intensity means

that

Spiral cutting

begins less often.

High / Very high

intensity means that

Spiral cutting

begins more often.

Note:

Spiral Cutting

does not start in slopes steeper

than 17%.

4.3.2 Object avoidance

Object avoidance

is only available for Automower®

430X/450X NERA.

The products senses objects on the lawn that is higher

than the grass with the

Object avoidance

function

enabled. When the product senses an object on the

lawn, the product turns and continues to cut in a

different direction. You can disable the

Object avoidance

function if it is unsatisfactory for your work area.

Note:

Object avoidance

can cause that the grass is

not cut around objects. The sensors can also sense high

grass or flowers in the work area as objects.

4.3.3 Weather timer

Weather timer

automatically adjust the cutting time to

the growth of the grass.

Weather timer

adjusts the

cutting time only for work areas with irregular pattern.

The product is not permitted to operate more than the

schedule settings.

Note: When using

Weather timer

, it is recommended

to make as much operating time as possible available

for

Weather timer

. Do not restrict the schedule more

than necessary.

The first operation of the day is set by the schedule

settings. The product completes 1 mowing cycle per

scheduled work area, then the

Weather timer

selects if

the product continues to operate.

Note:

Weather timer

is reset if the product does not

operate for more than 50 hours, or if a

Reset of all user

settings

is done.

Weather timer

is not changed if a

Reset

of schedule settings

is done.

4.3.4 ECO mode

ECO mode

disables the signal in the boundary wire,

guide wire and the charging station, when the product is

parked or is charging. The LED indicator of the charging

station flashes green when the loop signal is disabled.

Note: Use

ECO mode

to save energy and to prevent

interference with other equipment, for example hearing

loops or garage doors.

Note: To start the product manually in the work area

you must first enable the loop signal.

4.3.4.1 To enable the loop signal

1. Set the product to ON.

2. Put the product in the charging station.

3. Push the STOP button.

4. Wait 2 seconds and then remove the product from

the charging station.

5. Make sure that the LED indicator of the charging

station is solid green.

6. Put the product where you want it to start to cut.

22 - Settings 2071 - 002 - 05.02.2024

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 320 NERA - 2024 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 320 NERA - 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info