Bedienungsanleitung Husqvarna Automower 320 NERA - 2024 (Seite 23 von 52) (Englisch)

819076

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

4.4 Installation

Installation

you can change the installation settings of

the product.

4.4.1 To find the charging station

The product can be set to search for the charging station

in 3 methods:

•

Charging station signal

•

Follow boundary wire

•

Follow guide wire

The factory setting is set to use the 3 search methods

at the same time. Use the factory setting to find the

charging station as fast as possible and to keep the risk

of tracks on the lawn to a minimum. The product always

starts to search for the

Charging station signal

. After

a specified time interval, it also uses

Follow guide

and

Follow boundary wire

Causes why the product cannot follow the wire:

• Obstacles near the wire have not been isolated.

• The charging station, the boundary wire or the

guide wire are not installed according to the

instructions in

To install the charging station on

page 17

To install the boundary wire on page 18

and in

To install the guide wire on page 19

4.4.1.1 Charging station signal

For some installations it is necessary to decrease the

signal of the charging station. For example when the

charging station is put near an obstacle, such as a bush

or a wall. The product finds the charging station signal

on the other side of the obstacle and tries to find the

charging station, but the object prevents it to go to the

charging station. You can set the charging station signal

min

avg

max

Note: Husqvarna recommends to set the charging

station signal to

max

. It is usually better to move the

charging station, than to decrease the range of the

charging station signal.

4.4.1.2 Follow guide wire and boundary wire

The time interval can be set for when the product starts

to follow the boundary wire and guide wire to find the

charging station.

4.4.2 Lawn coverage

4.4.2.1 GPS assisted navigation

The product has

GPS Assisted Navigation

that helps

the product to select the most optimal operation. This

function is enabled from the factory. If you want to do

manual settings for your lawn, disable the

GPS Assisted

Navigation

and make settings for

Area 1-5

. Disable

the

GPS Assisted Navigation

if you want to use the

Systematic Passage Mowing

function and make settings

for

Area 1-5

. Refer to

Settings for Area 1-5 on page 23

4.4.2.2 Settings for Area 1-5

Use this function if the work area includes remote

parts that are connected with narrow passages to keep

a satisfactorily cut work area. The

Lawn Coverage

function is used to cut remote parts of the work area.

The

Systematic Passage Mowing

function is used to

cut in narrow passages. A guide wire must be installed

to use these functions. You can set a maximum of 5

remote areas where the product starts to cut.

The

Systematic Passage Mowing

function is applicable

for narrow passages of 60 cm - 1.5 m / 23 in. - 4.9

ft. width. The product moves in a pattern to cut the

full passage width. The product starts the

Systematic

Passage Mowing

at the set distance from the charging

station. When the product is at the end of the narrow

passage, the product continues to cut the work area as

usual.

You can set the product to follow the guide wire to the

set specified distance before it starts to cut.

Area A, approximately 50%

Area B, approximately 30%

Area C, approximately 20%

Each area can be enabled or disabled. Use the

Test

function to measure the distance from the charging

station to where the product must start to cut. Refer to

To measure the distance from the charging station on

page 24

The default settings lets the product follow the guide

wire 300 m / 980 ft. in 20% of the times it moves out

from the charging station. If the guide wire is less than

300 m / 980 ft. the product will follow it to the point

where the guide wire is connected to the boundary wire.

2071 - 002 - 05.02.2024 Settings - 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Automower 320 NERA - 2024 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Automower 320 NERA - 2024

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info