Message Cause Action
Cutting system
blocked
Grass or other object has wrapped
around the blade disc.
Examine the blade disc and remove the
grass or other object.
The blade disc lies in a pool of water. Move the product and prevent the col-
lection of water in the work area.
Message Cause Action
Trapped
The product is stuck in a small area be-
hind a number of obstacles.
Examine if there are any obstacles
which make it hard for the product to
move away from this location.
Wrong PIN code
Wrong PIN code has been entered.
Five attempts are permitted, and the
product is then blocked for a period of
time.
Enter the correct PIN code. If the PIN
code is incorrect, use the link in the app
to send the PIN code to your registered
e-mail address. If you have not regis-
tered the e-mail address, contact your
local Husqvarna representative.
Empty battery
The product cannot find the charging
station.
Change the position of the guide wire.
Refer to
To install the guide wire on
page 27
.
Check the installation settings about
how to find the charging station. Refer
to
To find the charging station on page
32
.
The battery is spent. Replace the battery. Refer to
Battery
on page 44
.
The charging station’s antenna is de-
fective.
Check if the indicator lamp in the
charging station flashes red. Refer to
Indicator lamp in the charging station
on page 55
.
No drive
The product is caught in something and
has been slipping.
Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
The work area includes a steep slope. Maximum guaranteed slope is 70%.
Steeper slopes should be isolated. Re-
fer to
To put the boundary wire in a
slope on page 23
.
The guide wire is not installed correctly
in a slope.
Make sure that the guide wire is instal-
led diagonally across the slope. Refer
to
To install the guide wire on page 27
.
Wheel motor over-
loaded
The product is caught in something. Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
1404 - 001 -
Troubleshooting - 49
