510448
16
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
16
1
2
3
E
F
G
12
34
I
H
Getting ready to sew
Inserting the bobbin
Press the ON/OFF switch to OFF.
1. Remove the bobbin cover by sliding it towards you.
2. Place the bobbin in the bobbin case. It drops in only one way
with the logo facing up. The thread unreels from the left of
the bobbin. The bobbin will then rotate counter-clockwise
when you pull the thread.
3. Place your À nger on the bobbin to keep it from turning as you
pull the thread À rmly to the right and then to the left into the
tension spring (E) until it “clicks” into place.
4. Continue threading around (F) and to the right of the thread
cutter (G). Slide on the bobbin cover (H). Pull the thread to
the left to cut (I).
Thread tension, 835/855
Use the recommended top thread tension setting given on the
GraphicDisplay. You might need to adjust the top thread tension
for special threads, fabrics and/or techniques. To set the tension,
turn the numbered tension dial. The higher the number the
tighter the tension.
Normally top thread tension is set to around 4. When sewing
buttonholes and decorative stitches set thread tension to around
3. When topstitching with a heavy thread in thick fabric, increase
the tension to 7-9.
Make a few tests on a scrap piece of the fabric you are going to
sew and check the tension.
Correct and incorrect thread tension
To understand the correct thread tension, sew a few sample
straight stitches at different settings.
1. Begin with a tension that is too loose, i.e. set at the lowest
number. The bobbin thread will lie straight and the top thread
will be drawn to the underside of the fabric.
2. If you set the tension at the highest number, the bobbin
thread will be visible on the top side of the fabric. The seam
may pucker and the top thread might break.
3. The correct thread tension is set when the threads interlock
in between both fabric layers or, in the case of decorative
stitches, on the underside.
Automatic thread tension, 875 Quilt
The 875 Quilt model automatically sets the best thread tension
for the selected stitch and fabric. Go to the SET Menu to adjust
the thread tension for specialty thread, techniques or fabric (see
page 29).
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna SAPPHIRE 875 Quilt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Deutsch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Holländisch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Französisch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info