510448
18
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
18
835/855 875 Quilt
1
2
5
7
3
6
4
8
9
2
3
7
6
4
5
1
Operating the machine
1. Needle Stop Up/Down
Press this button to move the needle down or up. The setting of
the needle stop position is changed at the same time.
The upper LED next to the button is lit when needle up is
activated and the lower LED is lit when needle down is activated.
You can also tap the foot control to raise or lower needle. If
both the needle and the presser foot are in up position, only the
presser foot will be lowered when you tap the foot control the
À rst time. Tap again to lower the needle.
2. Sensor Foot Up/Extra Lift
This button raises the presser foot to the up position. Press the
button once more and the presser foot will raise to the Extra
Lift position, to make it easy to place and remove heavy or Á uffy
fabrics and battings under the presser foot.
3. Sensor Foot Down/Pivot Position
Press Sensor Foot Down and Pivot and the presser foot will
be completely lowered so the machine À rmly holds the fabric.
Press Sensor Foot Down again to raise the presser foot to Pivot
position or a Á oating position over the fabric for easier placement
of the fabric.
The presser foot will be lowered automatically when you start
sewing. You can also tap the foot control to lower the presser
foot.
When you stop with the needle in the down position, the presser
foot is automatically lifted to pivot position. This function can be
turned off in the SET Menu, see page 29.
4. Stop
STOP is used to conclude a stitch or to sew just one unit of
the stitch. Your sewing machine ties off the thread and stops
automatically when one stitch unit or stitch program has been
completed. The LED next to the button is lit when STOP is
activated. STOP is cancelled once you have used the function.
Press the button again if you wish to activate it once more.
STOP is also used to repeat the same size darning, bartack and
Automatic Tapering stitch with the same size.
TIP: If you want to repeat the STOP function for a stitch
unit several times in a row you can save the stitch with a
STOP at the end in a program (see Programming, page
25).
5. Speed
All stitches in your sewing machine have a pre-set, recommended
sewing speed. Press the SPEED button or, on the 875 Quilt
model: SPEED+ or SPEED– to increase or decrease the sewing
speed. For 835 and 855 there are three speed levels and for 875
Quilt there are À ve speed levels. The speed level is shown on the
GraphicDisplay. You cannot select a higher speed than the default
max speed for the selected stitch.
Function buttons
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna SAPPHIRE 875 Quilt wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna SAPPHIRE 875 Quilt

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Deutsch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Holländisch - 56 seiten

Husqvarna SAPPHIRE 875 Quilt Bedienungsanleitung - Französisch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info