Bedienungsanleitung Husqvarna TRIBUTE 140C (Seite 17 von 48) (Englisch)

518172

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Operating the ma ine – 17

1. Needle Stop Up/Down

Press this button to move the needle down or up. The

setting of the needle stop position is changed at the same

time.

The upper LED next to the button is lit when needle up

is activated and the lower LED is lit when needle down is

activated.

You can also tap the foot control to raise or lower needle.

If both the needle and the presser foot are in up position,

only the presser foot will be lowered when you tap the foot

control the À rst time. Tap again to lower the needle.

2. Sensor Foot Up/Extra Lift

This button raises the presser foot to the up position. Press

the button once more and the presser foot will raise to the

Extra Lift position, to make it easy to place and remove

heavy or Á uffy fabrics and battings under the presser foot.

3. Sensor Foot Down/Pivot Position

Press Sensor Foot Down and Pivot and the presser foot

will be completely lowered so the machine À rmly holds the

fabric. Press Sensor Foot Down again to raise the presser

foot to Pivot position or a Á oating position over the fabric

for easier placement of the fabric.

The presser foot will be lowered automatically when you

start sewing. You can also tap the foot control to lower the

presser foot.

When you stop with the needle in the down position, the

presser foot is automatically lifted to pivot position. This

function can be turned off in the SET Menu, see page 25.

4. STOP

STOP is used to conclude a stitch or to sew just one unit

of the stitch. Your sewing machine ties off the thread and

stops automatically when one stitch unit or stitch program

has been completed. The LED next to the button is lit

when STOP is activated. STOP is cancelled once you have

used the function. Press the button again if you wish to

activate it once more.

STOP is also used to repeat the same size darning, bartack

and Automatic Tapering stitch with the same size.

TIP: If you want to repeat the STOP function for a stitch unit several

times in a row you can save the stitch with a STOP at the end in a

program (see Programming, page 22).

5. Speed

All stitches in your sewing machine have a pre-set,

recommended sewing speed. Press the SPEED button

to increase or decrease the sewing speed. There are

three speed levels. The speed level is shown on the

GraphicDisplay. You cannot select a higher speed than the

default max speed for the selected stitch.

6. FIX

By using the FIX button you can lock the stitch at the

beginning and/or at the end. The LED next to the button

is lit when FIX is activated. Press the FIX button to turn

off the function.

The FIX function is automatically activated when a stitch

is selected or when STOP has been used. You can turn off

the automatic FIX function in the SET Menu, see page 25.

The FIX function can be programmed (see page 23).

7. Reverse

Press the button while sewing and the machine will sew

in reverse until the button is released. Then your sewing

machine will sew forward. The LED on the button is lit

when reverse is activated.

For permanent reverse, press the button once before

starting to sew. Your sewing machine sews in reverse until

you press the button again.

Reverse is also used when sewing buttonholes, bartacks and

darning to step between the parts of the stitch

FUNCTION BUTTONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna TRIBUTE 140C Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna TRIBUTE 140C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info