734150
14
Zoom out
Zoom in
Vorherige Seite
1/368
Nächste Seite
Maintenance
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
Regular service and inspection
Regular service and inspection of the product must
be done by qualified personnel referring to related
legislation and regulations.
Electrical tests for ground continuity, insulation
resistance, and condition of the flexible cord must be
done frequently.
If a defect is found, the product must be removed
from service and repaired by an approved service
technician.
Maintenance of Dust Class L products
The following applies for Dust Class L products, WDC
325L.
During maintenance and cleaning, use the product
safely for maintenance personnel or other persons.
In the maintenance area:
Use filtered mandatory airflow.
Use protective clothing.
Clean the maintenance area so that no harmful
material get out in other areas.
If the parts can not be cleaned satisfactorily during
maintenance and repair:
Put the parts in correctly sealed bags.
Discard the parts referring to legal regulations.
To empty the dirt container after liquid
pick up
1. Stop the product, see
To stop the product on page
13
.
2. Disconnect the hose from the vacuum inlet by pulling
out the hose.
3. Unlock the clasps and lift off the motor unit. (Fig. 8)
4. Empty the dirt container by tilting it rearward and put
the liquids into a floor drain. * Handle only on some
models. (Fig. 29)
CAUTION:
Always empty and clean the
dirt container and the float system after
liquid pick up. Do not pick up liquid
without the float system and filter
installed in the product.
5. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To empty the dirt container after dry
pick up
1. Stop the product, see
To stop the product on page
13
.
2. Unlock the clasps and lift off the motor unit. (Fig. 8)
3. Do a check to see if the filter bag is full.
4. Remove the filter bag if it is full.
CAUTION: Do not pick up dry material
without the filter and the filter bag in
position.
5. Install a new filter bag, see
To install the filter bag on
page 12
.
Note: The suction efficiency of the product depends
on the dimension and quality of the filter and the filter
bag. Use only Husqvarna filter and filter bags.
6. Put the motor unit on the dirt container and lock the
clasps. (Fig. 12)
To clean the filter, filter cleaning system
The product has a semi-automatic filter cleaning system.
Use the filter cleaning system regularly, at the latest
when the cleaning performance is no longer sufficient.
Regular use of the filter cleaning system increases the
life of the filter.
1. Clean the filter when the suction power is no longer
sufficient. (Fig. 30)
2. Put the hose in the vacuum inlet on the front of the
product. (Fig. 16)
3. Connect the appliance into the mains.
4. Put the main switch to the "I" position. (Fig. 17)
5. Put the handle in your hand (A) to make suction into
your hand.
6. Beat the filter cleaning button 3 times with your fist
(B). (Fig. 31)
7. If the suction power is not sufficient, remove the
filter, see
To replace the filter on page 15
.
8. Shake, brush or wash the filter to clean it.
9. Let the filter dry.
10. Install the filter, see
To install the filter bag on page
12
.
14
562 - 004 - 20.03.2019
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna WDC 225 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info