Bedienungsanleitung Hwam 4620 (Seite 44 von 48) (Englisch, Dänisch, Schwedisch, Norwegisch)

613741

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Insufcient ring

If the reproof materials in the combustion chamber are blackened after a re, then the stove is polluting,

and the automatic air ow regulation system is malfunctioning. Therefore, more air must be supplied by

turning the regulator clockwise (to the right). It may also be necessary to burn more wood.

How to achieve the best combustion

• Use clean and dry wood.

Wet wood results in inefcient combustion, plenty of smoke, and soot. Furthermore, the heat will dry

the wood, not heat up the room.

• The re should only be stoked with a little wood at a time.

You achieve the best combustion by starting up a re often and using only a little wood. If you use

too much rewood, it will take some time before the temperature reaches a level where you achieve

a good combustion.

• Make sure there is the right amount of air.

You should also make sure that there is plenty of air – especially in the beginning - so the temperature

in the wood burning stove climbs quickly. In this way the gasses and particles released during the

combustion will be consumed by the re. Otherwise they build up soot in the chimney (constituting

a chimney re risk) or will be released in a non-combusted state into the environment. The wrong

amount of air supply creates inefcient combustion and a modest effect.

• Don’t savour the re during night time.

We advise against adding re wood to your stove and reducing the air supply at night in an attempt

to still have some embers left in the morning. If you do so, large amounts of hazardous smoke will be

emitted, and your chimney will be exposed to unnecessarily large amounts of soot with the risk of a

chimney re.

Cleaning the glass

We recommend wiping the glass after a re. This is best done using a paper towel.

Types of fuel

The stove may be damaged by very high temperatures and the glass may turn white, for example. This

can be avoided by never allowing the stove to burn with the door open and taking great care with types

of fuel that develop excessive heat, such as briquettes.

We recommend using birch or beechwood, which has been split and stored for at least one year outdoors

under cover. Wood stored indoors tends to become too dry and burn too quickly.

Briquettes give off a lot of heat. Certain types expand considerably, thus causing an uncontrollable combustion.

The stove is EN 13240 approved for ring wood only. No particle board, lacquered, painted

or treated wood, plastics, or rubber may be burned.

maIntenance

Cleaning

Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to

vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a

dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other

kind of cleaner, as this will damage the lacquer.

Once a year, the stove should be thoroughly serviced. The combustion chamber should be cleared of ashes

and soot. The hinges and the closing hook must be greased with liquid copper fat spray (heat-resistant up

to 1100°C), see drawing I. Lift the door approx. ½ cm and spray copper fat onto the hinge leaf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hwam 4620 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hwam 4620

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info