675868
10
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
HYUNDAI professional
10
PACKAGE CONTENTS
The package contains the following parts:
Hot-air gun
Reduction nozzle
Fishtail nozzle
Glass protection nozzle
Reflector nozzle
Manual
Safety warnings
Guarantee and service
DESCRIPTION
Your hot-air gun has been designed for the
following operations:
- removing paint and paint residues from wood,
metal and synthetics;
- removing self-adhesive labels;
- applying PVC labels;
- moulding low-temperature materials, including
acrylics and perspex;
- melting together synthetics, including materials
and foils with a PVC layer;
- shrinktubing;
- heating pipe attachments and bowing pipes;
- repairing skis, surf boards and similar sporting
equipment.
1. Air flow outlet
2. Ventilation opening
3. Handle
4. On/off switch
5. Reduction nozzle
6. Fishtail nozzle
7. Glass protection nozzle
8. Reflector nozzle
Instructions for use
Aim the mouthpiece of the machine at the
workpiece.
Heat the material a few seconds before
working it.
If required set a higher or lower level
temperature by opening or closing the
ventilation opening.
For optimum result it is recommended to test
the machine first on a small part of the
workpiece.
Switching on (fig. B)
Check if switch (4) is in position ‘0’
before plugging in.
Switch on the tool by pushing switch (4) in
desired position:
Setting Temperature Air flow
I 50 °C 250 litres/minute
II 50-450 °C 250 litres/minute
III 90-600 °C 500 litres/minute
When using it for the first time, some smoke may
emit from the tool; this is normal and will soon
cease.
Switching off
Set the on/off switch to position ‘I’ and let it run
for a few minutes.
Then set the on/off switch to position ‘0’.
Let the tool cool down before moving or
storing it.
Immediately switch off the appliance when
Plug and/or cable are defective or damaged.
The switch is defective.
You smell or see smoke caused by scorched
insulation from the hot air gun.
When the temperature is excess
600° C, the heats switches it off
automatically, however, the heater
continues to run. When the heater has
cooled to operating temperature, the
heater is switched on again.
Use of accessories (fig. C)
The air temperature can be adjusted to suit a wide
range of applications. The table below suggests
settings for different applications.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hyundai 56552 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info