675868
11
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
11
ENGLISH
Setting Applications
I
Cooling the hot parts
Cooling the machine before
changing the nozzle
II
Drying paint and varnish
Removing stickers
Waxing and de-waxing
Drying wet timber prior to filling
Shrinking PVC wrapping and
insulation tubes
Thawing frozen pipes
III
Welding plastics
Bending plastic pipes and sheets
Loosening rusted or tightly fastened
nuts and bolts
Removing paint and lacquer
Soldering plumbing joints
Use of the correct nozzle
Nozzles could be used with the heat gun for
different applications.
Reduction nozzle (5)
Welding, shrink sleeving (heat
concentrated over small area).
Fishtail nozzle (6)
Drying, thawing (heat spread over
wider area).
Glass protection nozzle (7)
Protection windows when stripping
frames.
Reflector nozzle (8)
Soldering pipes.
Make sure that the tool is switched off
and the nozzle has cooled down.
Falling down nozzle can set an object
on fire. Nozzles must be mounted
firmly and secure on the unit.
Touching a hot nozzle can lead to
serious burns .Before attaching or
replacing a nozzle, allow the unit to
cool down completely or use a suitable
tool.
A hot nozzle can set a surface on fire.
Place down hot nozzles only on
fire-proof surfaces.
An incorrect or defective nozzle can
lead to heat accumulation and damage
the unit.
Stationary use
This tool can also be used in stationary mode.
Place the tool onto the workbench.
Secure the cable to prevent pulling the tool off
the workbench.
Carefully switch the tool on.
Make sure that the nozzle always
points away from you and any
bystanders. Make sure not to drop
anything into the nozzle.
Troubleshooting
In case the hot air gun does not work well, we
give you subjoined some possible causes and
their solutions.
The engine gets overheated
The ventilation slots of the hot air gun are dirty.
Clean the ventilation slots.
The hot air gun does not start when it is
witched on
Interruption in the electrical circuit.
Check the mains lead and the mains plug.
The switch is defective.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
The engine does not work, but it does heat
Interruption in the electrical circuit.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hyundai 56552 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info