Bedienungsanleitung I-onik WS-110 (Seite 5 von 6) (Deutsch, Englisch)

521906

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

8 9

Note:

The 4x AA alkaline batteries serve as backup power only when AC power failed. You should not rely

on battery power and make sure the proper AC power is supplied to the dialler at all times.

• Low battery indication: If the batteries need to be replaced, the icon ashes.

3.2 Mounting the Auto Dialler/Distress Alarm

• Mount the transmitter on a xed surface such as a wall, close to a telephone connection, using the

screw and wall plug provided.

3.3 Connecting the Auto Dialler to your home telephone

• A phone line must be connected to the dialler in order for the Auto Dialler to work.

• Open the battery compartment to reveal 2 sockets for telephone cables.

• Connect the ‘Line’ socket to your wall telephone jack.

• Connect the ‘Phone’ socket to your telephone, which then will share the phone line with the Auto

Dialler. Normal telephone functions are interrupted only during an emergency, when the Auto

Dialler takes control of the phone line.

3.4 Troubleshooting

• If the LCD screen shows ‘FAIL’ this means that the telephone line is not properly attached or phone

connections are invalid. Please check the connection.

• If the recording quality is low. Please record again in a quiet environment with your mouth close to

the microphone. (2-6 inches).

4. Quick Start Guide

Step 1:

Enter SETUP

mode for

prior to any

program-

ming

To ENTER

SETUP mode

Press

to activate the keyboard Enter the 4-DIGIT

PIN (Default PIN is ‘1234’).

Press

to go into SETUP mode.

To RECORD

a message

Press and hold

key for 2 seconds until REC shows

on the screen to start the recording.

Speak clearly into the microphone to record the mes-

sage Recording will nish when you press

again or

after 20 seconds of recording.

Example message:

This is a security alert from [your name] at [your

address]. After listening to this message, please press

the hash key (#) and press ‘1’ to listen in to this

address or ‘3’ to speak.

Step 2:

Under SETUP

mode

To PLAYBACK

your message

Press and release

to playback the recorded message.

To CHECK

PHONE

NUMBERS

Press

(Display will show ‘1’ for the rst number).

Press

again for checking subsequent phone numbers.

To ENTER/

STORE

PHONE

NUMBERS

Press

(Display will show ‘1’ for the rst number)

Repeat this step to choose which phone number you

wish to program (1-8).

Press

and enter the phone number digits (maxi-

mum 15 digits).

If number entered incorrectly, press

to clear the

number and re-enter the phone number digits

Press

to nish.

To ERASE

a stored

phone

number

Press

(Display will show ‘1’ for the rst number).

Repeat this step to choose which phone number you

wish to erase (1-8).

Press

then to conrm erasing.

To program

the number

of DIALLING

CYCLES

Press

(Display will show ‘1’ for the rst number)

Repeat this step until the display shows .

Press

then enter the number of cycles you wish the

Auto Dialler to run through (select 1 to 9 cycles, default

cyle is 3 times) and press

to conrm.

To CHANGE

the 4-DIGIT

Press

(Display will show ‘1’ for the rst number)

Repeat this step until the display shows .

Press

and enter a new 4-DIGIT PIN.

Re-enter the new 4-DIGIT PIN and press

to conrm.

To ENTER

ALERT MODE

Press

to enter ALERT mode.

Step 3:

Under ALERT

mode

To activate

EMERGENCY

DIALLING

When triggered by an external sensor, the i.onik

Auto

Dialler immediately starts dialling through the stored

telephone numbers according to the number of dialling

cycles you have programmed.

To activate

PANIC

DIALLING

Press

and simultaneously or press the PANIC

button on the KEYFOB remote.

To CANCEL

EMERGENCY

or PANIC

DIALLING

If the EMERGENCY or PANIC DIALLING has been

activated in error, the dialling can only be cancelled by

disconnecting the mains power to the Auto Dialler and

disconnecting the battery backup.

5. Instructions for the Recipient

Note:

There are several things that your call recipients should know in order to successfully receive

and terminate an emergency call from your Auto Dialler. Therefore make sure your Auto Dialler

recipients understand what to do when they receive your emergency call by passing them a copy

of these instructions.

5.1 To START speakerphone conversation

• After having full listened to the recorded message, press the hash key (#), to conrm that the

message is NOT merely delivered to a voice mail.

• Activate the ‘Listening-in’ function by pressing ‘1’ and ‘Speaking-in’ function by pressing ‘3’. These

can only be used when the call recipient presses the Hash key (#).

• Time out period is 60 seconds and recipients can extend either the listening time or speaking time

by pressing ‘1’ or ‘3’ accordingly. With each pressing, a further 60 seconds will be allowed by the

Auto Dialler. The conversation will be disconnected if the Auto Dialler receives no instruction.

5.2 To STOP the Emergency Message of the Existing Call AND all the Remaining Calls.

• The Auto Dialler will continue dialling the numbers until the call is answered.

• The recipient can stop the Auto Dialler by waiting until the message has nished, and pressing (#).

This will stop the Auto Dialler from calling this and all remaining phone numbers.

• As this termination stops the Auto Dialler from calling any more phone numbers, the recipient must

know the exact situation before terminating it.

5.3 To DISCONNECT all Calls after Conversation

• Once the speakerphone conversation is over, the recipient should disconnect the call by pressing (#)

instead of just hanging up the phone. This will terminate the connection for all existing calls and

the remaining calls.

6. CANCELLING the Auto Dialler

• If the Auto Dialler is activated in error it can only be cancelled by:

- The recipient following the instructions in 5.2.

- Cutting off the main power supply to the Auto Dialler AND disconnecting the back-up battery.

I-onik WS-110 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info