12296
58
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
POCKET BEEP AND TONE SQUELCH
12
53
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Set the operating frequency.
Ç Program the subaudible tone frequency in set
mode.
See p. 29 for programming details.
É Push [FUNC] then [T SQLS] to turn the
pocket beep ON.
Turn OFF the pager or code squelch to activate the
pocket beep. (pgs. 59, 62) The pocket beep cannot
be used with the pager or code squelch.
Ñ When a signal with the correct tone is received,
the transceiver emits beep tones for 30 sec.
and ashes S.
Ö Push [PTT] to answer or push [ECLR] to stop
the beeps and ashing.
Tone squelch is automatically selected.
Pushing [FUNC] then [TSQL] also selects the tone
squelch.
Ü To cancel the function, push [FUNC] then
[GT-OFF].
D Waiting for a call from a specic station
A subaudible tone matched with the stations frequency is
necessary. Use the tone squelch on the next page or a sub-
audible tone encoder (p. 29).
Pocket beep operation
This function uses subaudible tones for calling and can be
used as a common pager to inform you that someone has
called while you were away from the transceiver.
To operate the pocket beep function, an optional UT-104 is
necessary. See p. 65 for installation details.
D Waiting for a call from a specic station
Push the desired bands tuning dial.
Set the operating frequency.
Program the subaudible tone frequency in set mode.
See p. 29 for programming details.
Push [(DTMF)T] for 1 sec., 2 times to indicate T SQLS
in the function display.
Turn OFF the pager or code squelch to activate the pocket beep.
(pgs. 59, 62) The pocket beep cannot be used in combination
with the pager or code squelch.
When a signal with the correct tone is received, the trans-
ceiver emits beep tones and ashes S.
Beep tones sound for 30 sec. To stop the beeps manually, push
the tuning dial (or any key).
•“S ashes coninuously until step or .
When receiving another call while S is ashing, no beeps sound.
Push [PTT] to answer.
Tone squelch is automatically selected when transmitting.
Push [(DTMF)T] for 1 sec. once or twice to cancel the function.
T SQLS
8
T-OFF
C
optional UT-104
IC-2710H.qxd 02.2.8 16:55 Page 53 (1,1)
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-2710H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info