12296
59
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
12
POCKET BEEP AND TONE SQUELCH
54
Tone squelch operation
The tone squelch opens only when receiving a signal with the
same pre-programmed subaudible tone. This function can be
activated on both bands with separate tone frequencies si-
multaneously. To operate the tone squelch function, an op-
tional UT-104 is necessary.
Push the desired bands tuning dial.
Set the operating frequency.
Program the subaudible tone frequency in set mode.
See p. 29 for programming details.
Push [(DTMF)
T] for 1 sec., several times until T SQL ap-
pears in the function display.
The pager or code squelch can be used together with the tone
squelch. (p. 62)
When the received signal includes the correct tone, the
squelch opens and the signal can be heard.
When the received signal includes an incorrect tone, the squelch
does not open. However, the S/RF indicator shows the received
signal strength.
To open the accessed bands squelch manually, push the ac-
cessed bands [MONI].
Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).
To cancel the tone squelch, push [(DTMF)T] for 1 sec.
•“T SQL disappears from the function display.
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Set the operating frequency.
Ç Program the subaudible tone frequency in set
mode.
See p. 29 for programming details.
É Push [FUNC] then [T SQL] to turn the tone
squelch ON.
The pager or code squelch can be used with the
tone squelch. (p. 62)
Ñ When the received signal includes the correct
tone, the squelch opens and the signal can be
heard.
When the received signal includes and incorrect
tone, the squelch does not open. However, the S/RF
indicator shows the received signal strength.
To open the accessed bands squelch manually,
push [MONI].
Ö Operate the transceiver in the normal way
(push [PTT] to transmit; release [PTT] to re-
ceive).
Ü To cancel the tone squelch, push [FUNC] then
[GT-OFF].
T SQL
9
T-OFF
C
IC-2710H.qxd 02.2.8 16:55 Page 54 (1,1)
59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-2710H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info