53
10
SET MODE
DD
Dial select step
Select the tuning step while pushing and
holding [FUNC] from 100 kHz, 1 MHz (de-
fault) and 10 MHz.
DD
Offset frequency
Sets the offset frequency for duplex (re-
peater) operation for each frequency band in-
dependently within 0 to 159.995 MHz range.
During duplex operation (–DUP or +DUP),
the offset frequency shifts the transmit fre-
quency (or while [SQL] (
ATT
•
SET
) is pushed).
The default value may differ according to the selected fre-
quency band (before accessing set mode) and transceiver ver-
sion.
The selected tuning step in VFO mode is used for setting
the offset frequency.
DD
Tone selection
Sets the tone encoder, tone squelch or DTCS
squelch operation and pocket beep capabil-
ity, when waiting for the desired signal.
• OFF : Regular noise squelch operation. (default)
•TONE : Using tone encoder. Some repeaters require
subaudible tones to be accessed.
• TSQL : Using tone squelch. The squelch opens only
when a signal with matched subaudible tone is
received.
•PBEEP : In addition to the “TSQL” setting, alert beeps
will sound when a signal with matched tone is
received.
• DTCS : Using DTCS squelch. The squelch opens only
when a signal with matched DTCS code is re-
ceived.
•PDTCS: In addition to the “DTCS” setting, alert beeps
will sound when a signal with matched DTCS
code is received.
The subaudible tone frequency and DTCS code are pro-
grammed as the tone frequency and DTCS code items, re-
spectively.
