■ Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
23
6
MEMORY OPERATION
D Transferring in memory mode
This is useful for transferring frequency and operat-
ing mode while operating in memory mode.
When you have changed the frequency or operat-
ing mode in the selected memory channel:
•Displayed frequency and mode are transferred.
•Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
[UP Y] or [Z DN] in memory mode.
• And, set the frequency or operating mode if required.
w Push [V/M] for 2 sec. to transfer the frequency and
operating mode.
• Displayed frequency and operating mode are trans-
ferred to the VFO.
e To return to VFO mode, push [V/M] momentarily.
TRANSFERRING EXAMPLE IN MEMORY MODE
Operating frequency : 14.020 MHz/CW (M-ch 16)
Contents of M-ch 16 : 14.018 MHz/CW
D Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Select VFO mode with [V/M].
w Select the memory channel to be transferred with
[UP Y] or [Z DN].
•“BLANK” appears if the selected memory channel is a
blank channel (and does not have contents).
e Push [V/M] for 2 sec. to transfer the frequency and
operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 16 : 14.018 MHz/CW
Push for 2 sec.
Push for 2 sec.
are transferred.
the memory channel.
