3
BASIC OPERATION
11
■
Setting tuning steps
This transceiver has 8 tuning steps (VHF and UHF bands
have independent settings) as follows:
• 5 kHz • 10 kHz • 12.5 kHz • 15 kHz
• 20 kHz • 25 kHz • 30 kHz • 50 kHz
➀ Push [VFO] to select VFO mode.
➁ Push [BAND] to select the VHF or UHF band.
➂ Push [(H/L)SET] for 1 sec. to enter set mode.
➃ Push [TONE] or [H/L] several times until “TS” appears.
➄ Rotate [DIAL] to select the desired tuning step.
➅ Push [(VFO)CLR] to exit set mode.
For convenience, select a tuning step that matches the fre-
quency intervals of repeaters in your area.
USING
SET MODE
D Via the keypad
(other band directly)
➀ Push [VFO] to select VFO
mode.
➁ Push 6 digit keys, starting
from the 100 MHz digit.
• The operating band changes
automatically.
• It’s not necessary to input the
decimal point.
D Other methods
➥ VIA THE DIAL: Rotate [DIAL] to change the frequency ac-
cording to the set tuning steps.
➥ USING THE MHz STEP: Push [
(VFO)MHz] for 1 sec., then
rotate [DIAL] to change the frequency in one MHz steps.
