30935
10
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
3
6
MENU
VIDEO
D TUNE
AUTO : Automatic tuning.
•“A.TUNE appears for approx. 2 sec. instead
of the screen display, when rst transmitting
after turning the power ON. The unit also re-
tunes in some cases.
MANUAL : Manual tuning.
Push [≈] to select [MANUAL] then push
[Ú] to activate the manual tuning slider.
Push [Ω ≈] to adjust desired tuning level.
D D.RANGE
Select the dynamic range of the PPI (Plan Position In-
dicator).
NAR. : Narrow dynamic range. Even weak re-
flections are displayed as strong reflec-
tions.
MID. : Mid dynamic range.
WIDE : Wide dynamic range. You can distinguish
between weak reections and strong re-
ections easily.
D IR
OFF : Turn the Interference Reduction function
OFF.
1 or 2 (ON)
: Turn the Interference Reduction function
1 (Low) or 2 (High).
D STRETCH
OFF : Turn the echo stretch function OFF.
ON : Turn the echo stretch function ON.
D PULSE
SP : Select the short pulse.
LP :Select the long pulse. LP indicator ap-
pears on the screen.
D SEA
The characteristic (curve) of a SEA knob can be cho-
sen as the optimal characteristic out of four kinds with
the height of an antenna.
D TRAIL TIME
6S,15S, 30S, 1M, 3M, 6M, 15M or :
Select the plot interval and vector time.
FUNCTION
D RING
OFF : Turn the xed range ring display OFF.
ON : Turn the xed range ring display ON.
D WPT
OFF :Non display the way point on the screen.
ON : Display the way point on the screen.
DPOSN DISP
SHIP: : Display your own ships position.*
CURS : Display the cursor position.**
* External latitude/longitude data required.
** External latitude/longitude data and bearing data required.
D DIST UNIT
NM : Display the distance unit in Nautical Mile.
KM : Display the distance unit in Kilometer.
D BRG
Select the displayed bearing type, no relation with the
bearing data format (NMEA, N+1 or AUX).
TRUE :Select the true bearing.
MAG :Select the magnetic bearing.
D EBL/PI (except HDG and CSE) (p. 15)
TRUE : True or magnetic direction.
360°R : Relative direction
PT/SB : Bow direction
D ZONE ALARM
IN : Alarm is emitted when the target comes into
the zone.
OUT : Alarm is emitted when the target goes out
of the zone.
D BEEP
OFF : Turn the beep tone OFF*.
ON : Turn the beep tone ON.
* Except alarm function.
FUNCTIONMENU
POSN DISP
WPT ON
DIST UNIT
BRG
EBL/PI
ZONE ALARM
BEEP
MAG
PT/SB
KM
OUT
ON
OFF
CURS
NM
TRUE
TRUE
IN
RING
OFF
ON
OFF
SHIP
360
˚
R
VIDEO MENU
D.RANGE
IR
STRETCH
PULSE
SEA
TRAIL TIME
ON
1 2
LP
MANUAL
AUTO
MID. WIDE
OFF
OFF
SP
6S
3M
15S
6M
30S
15M
1M
TUNE
1 2 34
NAR.
MR-1000R2_T2.qxd 04.2.24 10:22 Page 6
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom MR1000TII wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info