30935
11
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
7
3
MENU
ATA (Automatic Tracking Aid)
D ATA
OFF : Turn the ATA function OFF.
ON : Turn the ATA function ON.
D No.DISP
OFF : Non display any mark number.
Sel :Display the selected mark number
only.
ALL : Display all mark numbers.
D VECT
TRUE : Select the true vector mode.
REL : Select the relative vector mode.
D OWN VECT
OFF : Non display the own ship vector.
ON : Display your own ships vector.
D ALARM (CPA/TCPA)
OFF : Turn the alarm function OFF.
ON : Turn the alarm function ON.
D CPA* LIMIT
0.1 to 10.0NM :Set the CPA (Closest Point of Ap-
proach) limit with [
Ω≈
].
D TCPA* LIMIT
1 to 60MIN : Set the TCPA (Time to CPA) limit time
with [
Ω≈
].
*CPA/TCPA: Closest Point of Approach and Time to Clos-
est Point of Approach limit is dened by the observer to
given warning when a target or targets are close to
within those limits from your own ship.
INT. SETTING
D MAG VAR
AUTO : Revise magnetic variation automatically.
NOTE: NMEA data is required. NEVER select
AUTO without NMEA data, incorrect varia-
tion data may entered. (p. 39)
MANUAL : Revise magnetic variation manually.
Push [
] to select [MANUAL], then push
[Ú]. Set the revise value with [
Ω≈
].
Push [Ú] or [MENU] to abort the menu.
D BRG INPUT
NMEA : NMEA0183 bearing data format.
N+1 : N+1 data format.
AUX :Other format.
GPS : Reads NMEA0183 COG format data as
HDG format.
D SPD INPUT
GPS : Use the GPS NMEA speed data.
LOG : Use the speed sensor data.
D TX INH START
0 to 359° :Push [
Ω≈
] to enter the start point of the
TX inhibit area.
D TX INH ANGLE
0 to 90° :Push [
Ω≈
] to enter the TX inhibit area.
D SAVE TIME
1M, 6M, 15M or 30M
: Select the stand by time during save
mode.
* The radar for TX interval scan is xed at 10 revolutions.
D SYMBOL
1/2/3 : Select the symbol brightness.
D CHARACTER
1/2/3 : Select the character brightness.
D KEY ILLUM
1/2/3/4 : Select the key illumination brightness.
INT. SETTING
BRG INPUT
SPD INPUT
TX INH START
TX INH ANGLE
SAVE TIME
SYMBOL
CHARACTER BRILL
NMEA
30M
LOG
6M 15M
MANUAL
AUTO
N+1 AUX GPS
GPS
0
˚
0
˚
KEY ILLUM
MAG VAR
1 23
1 2 3
1234
7.2
˚
W
1M
ATA MENU
VECT
No.DISP OFF ALL
OWN VECT
ALARM
CPA LIMIT
TCPA LIMIT
TRUE
ON
ON
ON
OFF
REL
OFF
OFF
1.0NM
1 MIN
ATA
SEL
MR-1000R2_T2.qxd 04.2.24 10:22 Page 7
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom MR1000TII wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info