Bedienungsanleitung Icom RS-BA1 (Seite 46 von 58) (Englisch)

670304

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

D Connecting to a radio through a network

ToconnecttoaradiothroughanetworkusingtheRemoteController,rstyouhavetoaccesstheradiousingthe

Remote Utility.

ToconnecttheradiousingtheRemoteUtility,seepage25whenyouareoperatingastheServer,orseepage35

when you are operating as a Remote station.

q Open the Remote Controller.

w Click the icon in the toolbar as shown to the

right, or click “Connect Setting...” in the [Op-

tion] menu, to display the Connect Setting

screen.

 •TheConnectSettingcannotbesetwhiletheradiois

connected.

e Select a radio that you want to control in the Model

menu.

 •Theitemsthatcannotbeusedintheselectedmodelwill

be grayed out.

r Select how to connect to the transceiver between

REMOTE,REMOTE/RS-232C,RS-232C,LAN,and

USB.

 •Theselectabledevicediffers,dependingonthetrans-

ceiver.

 •Whenthe“MODSelecthasalsobeenchanged.”dialog

is displayed, click [OK].

 •Theconrmationdialogfortheconnectionsettingmay

be displayed, depending on the transceiver. If connected

correctly, click [OK].

t Select a radio that you are accessing with the Re-

mote Utility, in the Remote Utility menu.

•TheCI-Vsettingsareautomaticallyloadedfromthe

Remote Utility to the CI-Veld.Thesettingsinclude

thevirtualCOMPortnumber,theradio’sCI-Vaddress

andbaudrateandthevirtualaudiodevicefortheVoice

Memory function.

If the desired radio is not displayed in the Remote

Utility menu, click [Search] to load the radios’ infor

mation from the Remote Utility.

y Click the Software closing turns OFF the Radio.

box to make a check mark to turn OFF the radio

when the Remote Controller is closed by clicking

the < > button or [Exit] on the File menu.

•

Only for transceivers that can be turned ON or OFF with

theCI-VPowerON/OFFcommand.

•

When the PC is shut down while the Remote Control-

ler is still running, the transceiver’s power may not be

turned OFF.

u Click [OK] to save the settings, and close the Con-

nect Setting screen.

REMOTECONTROLLER'SBASICOPERATION

■ Connecting to a radio with the Remote Controller (Continued)

i Click the icon in the toolbar as shown to

the right, or click “Connect ON” in the [File]

menu, to connect to the radio.

 •Whentheconnectionhassucceeded,theradio’scur-

rent data will be displayed on the main panel.

 •Iftheconnectionfails,andanerrorscreenisdisplayed,

solvetheproblemusingthe“6.TROUBLESHOOTING”

section.(p.48)

 •Todisconnectfromtheradio,clicktheiconas

shown to the right, or click “Connect OFF” in the

[File] menu.

- The radio will be turned OFF if it can be turned ON or

OFFwiththeCI-VPowerON/OFFcommand.

q Select

e Select

t Click

r Click

w Select

If you insert a check mark, the radio power

turns OFF when closing the software.

SeetheHelplefortheRemoteControlsoft-

ware for more details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom RS-BA1 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info