Bedienungsanleitung Icom RS-BA1 (Seite 47 von 58) (Englisch)

670304

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

REMOTECONTROLLER'SBASICOPERATION

D Directly connecting to a radio

If a radio is physically connected to your PC, you can directly access the radio using the Remote Controller, instead

of using the Remote Utility.

•WhenyouareoperatingaradioontheremotecontrolsystemwiththeRemoteController,withouthavingusedthe

Remote Utility to connect, let other users know that the radio is being used.

q Open the Remote Controller.

w Click the icon in the toolbar as shown to the

right, or click “Connect Setting...” in [Option]

menu, to display the Connect Setting screen.

e Select a radio that you want to control in the Model

menu.

 •Theitemsthatcannotbeusedintheselectedmodelwill

be grayed out.

r Select how to directly connect to the radio in the

Connection menu.

 •Whenthe“MODSelecthasalsobeenchanged.”dialog

is displayed, click [OK].

 •Theconrmationdialogfortheconnectionsettingmay

be displayed, depending on the transceiver. If connected

correctly, click [OK].

t Select “Not Use” in the Remote Utility menu.

y Select the COM port number to which the radio is

connected, in the COM Port menu.

uEntertheradio’sCI-VaddressintheCI-V address

(Radio)eld,andselecttheradio’sbaudrateinthe

Baud rate (bps) menu.

If the radio’s baud rate is set to “Auto,” select

“19200”intheBaud Rate (bps) menu.

•Tocheckorchangetheradio’sCI-Vaddressandbaud

rate settings, see the instruction manual that comes

with the radio.

i Click the Software closing turns OFF the Radio.

box to make a check mark to turn OFF the radio

when the Remote Controller is closed by clicking

the < > button or [Exit] on the File menu.

•

Only for transceivers that can be turned ON or OFF with

theCI-VPowerON/OFFcommand.

•

When the PC is shut down while the Remote Control-

ler is still running, the transceiver’s power may not be

turned OFF.

o Click [OK] to save the settings, and close

the Connect Setting screen.

!0 Click the icon in the toolbar as shown to the

right, or click “Connect ON” in the [File] menu, and

connect to the radio.

 •Whentheconnectionhassucceeded,theradio’scur-

rent data will be displayed on the main panel.

 •If the connection fails, and an error screen

is displayed, solve the problem using

the “6. TROUBLESHOOTING” section.

(p.48)

 •Todisconnectfromtheradio,clicktheiconas

shown to the right, or click “Connect OFF” in

the [File] menu.

- The radio will be turned OFF if it can be turned ON or

OFFwiththeCI-VPowerON/OFFcommand.

q Select

w Select

e Select

y Click

t Click

r Enter

If you insert a check mark, the radio power

turns OFF when closing the software.

SeetheHelplefortheRemoteControlsoft-

ware for more details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Icom RS-BA1 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info