Bedienungsanleitung Ikea FRAMTID HW380 (Seite 6 von 6) (Englisch)

468492

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

5019 618 33068/A

Electrical connection

The mains voltage must match that given on the rating plate

located inside the hood. If provided with a plug, connect the

hood to a socket complying with the current regulations and

located in an accessible area. If it does not have a plug (direct

connection to the power supply) or if the plug is not in an

accessible place, fit a suitable double-pole switch that ensures

complete disconnection from the power supply in category III

overvoltage conditions, complying with the installation rules.

WARNING: Before reconnecting the hood circuit to the

power supply and checking correct operation, always make

sure the power cable is correctly fitted and that it was NOT

crushed in its housing during installation. Make sure to have

this operation carried out by a specialised technician.

Cleaning the hood

WARNING: Failure to remove oil/grease (at least once a

month) could result in fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for

future reference, in order to ensure best use of your hood.

The packing materials (plastic bags, polystyrene, etc.) are a

potential source of danger and must be kept out of the reach

of children.

Make sure the hood has not been damaged during transport.

Declaration of conformity

This product has been designed, manufactured and put on

the market in conformity with:

- safety objectives of the “Low Voltage” Directive

2006/95/EC (which replaces 73/23/EEC as amended)

- protection requirements of “EMC” Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

If the hood does not work:

• Is the plug properly inserted in the power socket?

• Is there a power failure?

If the hood is not extracting enough:

• Is the right speed selected?

• Do the filters need cleaning or replacing?

• Are the air outlets blocked?

If the lamp does not work:

• Does the lamp need replacing?

• Is the lamp correctly fitted?

AFTER-SALES SERVICE

Before calling the After-Sales Service

1. Check to see if you can fix the problem yourself

(see “Troubleshooting Guide”).

2. Switch the appliance off and then on again to check if the

problem has been eliminated.

3. If the problem persists, contact the After-Sales Service.

Specify:

• the type of fault,

• the product model given on the dataplate inside the

hood, visible on removing the grease filters,

• your full address,

• your telephone number and area code,

• the Service code (the number under the word SERVICE

on the dataplate inside the hood, behind the grease

filter).

If any repairs are necessary, contact an authorised Service

Centre (to ensure the use of original spare parts and correct

repair).

Failure to comply with these instructions can compromise

the safety and quality of the product.

FINNL P I GR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ikea FRAMTID HW380 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ikea FRAMTID HW380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info