ENGLISH 10
energy and water savings. Information on correct loading of
tablewar
loading it is recommended to use dedicated wash options
(Half load), illing up only selected racks. Incorr
overloading the dishwasher may incr
(such as water
level), r
1. Check water connection
Check that the dishwasher is connected to the water supply
and that the tap is open.
2. Switch on the dishwasher
Open the door and pr
3. Load the racks (see L
4. Filling the detergent dispenser
(see FILLING THE DETERGENT DISPENSER).
5. Choose the progr
Select the most appr
the type of crockery and its soiling le
DESCRIPTION) by pr
ENGLISH
7
Contr ol panel
Pr oduct description
1
2
3
4
5
6
10
7
11
9
8
First use
ADVICE REGARDING THE FIRST TIME USE
FILLING THE SAL T RESER VOIR
(see PRODUCT DESCRIPTION)
SALT REFILL indicator light
1 2 3 4 5 6 7 8 9 10 11
3sec
h
.
Select the desir
6. Start
Start the wash cycle b
going from icker to lit) and closing the door within 4 sec.
When the progr
was not closed within 4sec., the alarm sound will be played.
In this case, open the door
close the door again within 4 sec.
7. End of wash cycle
The end of the wash cycle is indicated b
ashing of the wash cycle number on the display
door and switch o the appliance by pr
button.
W
avoid burns. Unload the racks, beginning with the lo
HALF LO
If there ar
load cycle may be used in order to save water
electricity and detergent. Select the progr
press the HALF L
light up. Press the HALF L
option.
Remember to halve the amount of detergent.
T
This setting allows you to optimize the performance
of the progr
used.
Press the ST
corresponding symbol will light up) if you use
combined detergents in tablet form (rinse aid, salt
and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be o.
• Manual pre-rinsing of table
water and energy consumption and is not recommended.
The machine will switch o automatically during certain
extended periods of inactivity
electricity consumption. If the crockery is only lightly soiled
or if it has been rinsed with water before being placed in the
dishwasher
accordingly
Modifying a running progr
If a wrong pr
pro
hold the ON/OFF button, the machine will switch o.
Switch the machine back on using the ON/OFF button and select
the new wash cycle and any desir
cycle by pr
within 4 sec.
Adding extr
Without switching o the machine, open the door (ST
Pause led starts blinking) (be ware of HO
crockery inside the dishwasher
and close the door within 4 sec., the cycle will resume fr
point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle, or if there is a
power cut, the cycle stops. Pr
close the door within 4 sec., the cycle will resume fr
at which it was interrupted.
DELA
The start time of the progr
period of time between 1 and 12 hours.
1. Press the DELA
symbol appears on the display; each time you
press the button, the time (1h, 2h, etc. up to max.
12h) from the start of the selected wash cycle will
be increased.
2. Select the wash progr
button and within 4 seconds close the door: the
timer will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches o and the wash cycle begins. T
the delay time and select a shorter period of time,
press the DELA
button repeatedly until the selected delayed start
indicator light «h» switches o.
The DELA
cycle has been started.
Daily Use
Functions
Check that the dishwasher is connected to the water supply
and that the tap is open.
Open the door and press the ON/OFF button.
(see LOADING THE RACKS)
(see PROGRAMS T ABLE).
Select the most appropriate program in accordance with the
type of crockery and its soiling level (see PROGRAMS
DESCRIPTION) by pressing the button.
Select the desired options (see OPTIONS AND FUNCTIONS) .
Start the wash cycle by pressing ST AR T/Pause button (led
is lit) and closing the door within 4 sec. When the program
starts you hear a single beep. If the door was not closed within
4sec., the alarm sound will be played. In this case, open the
door , press ST AR T/Pause button and close the door again
within 4 sec.
The end of the wash cycle is indicated by beeps and by the
ashing of the wash cycle number on the display . Open the
door and switch of f the appliance by pressing the ON/OFF
button.
W ait for a few minutes before removing the crockery - to avoid
burns. Unload the racks, beginning with the lower one.
If a wrong program was selected, it is possible to change it, pro -
vided that it has only just begun: open the door , press and hold
the button, the machine will switch of f.
Switch the machine back on using the button and select
the new wash cycle and any desired options; Start the wash cycl e
by pressing button and closing the door within 4 sec.
Without switching of f the machine, open the door (
led starts blinking) ( ) and place the
crockery inside the dishwasher . Press the button
and close the door within 4 sec., the cycle will resume from the
point at which it was interrupted.
If the door is opened during the wash cycle, or if there is a power
cut, the cycle stops. Press the button and close
the door within 4 sec., the cycle will resume from the point at
which it was interrupted.
DAILY USE
Functions
- Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
consumption.
- Mixed soil. For normally soiled dishes with dried food residues.
- Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
for delicate items).
- Use to refresh crockery planned to be washed later. No detergent to be used with this program.
- Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
- Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
maintenance of the dishwasher.
- Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
using hot water.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
see PROGRAMS T ABLE
If there are not many dishes to be washed, a half load
cycle may be used in order to save water , electricity and
detergent. Select the program and press the HALF LOAD
button: the indicator light will light up. P ress the HALF
LOAD button to deselect this option.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
– enabled – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
Check that the dishwasher is connected to the water supply
and that the tap is open.
Open the door and press the ON/OFF button.
(see LOADING THE RACKS)
(see PROGRAMS T ABLE).
Select the most appropriate program in accordance with the
type of crockery and its soiling level (see PROGRAMS
DESCRIPTION) by pressing the button.
Select the desired options (see OPTIONS AND FUNCTIONS) .
Start the wash cycle by pressing ST AR T/Pause button (led
is lit) and closing the door within 4 sec. When the program
starts you hear a single beep. If the door was not closed within
4sec., the alarm sound will be played. In this case, open the
door , press ST AR T/Pause button and close the door again
within 4 sec.
The end of the wash cycle is indicated by beeps and by the
ashing of the wash cycle number on the display . Open the
door and switch of f the appliance by pressing the ON/OFF
button.
W ait for a few minutes before removing the crockery - to avoid
burns. Unload the racks, beginning with the lower one.
If a wrong program was selected, it is possible to change it, pro -
vided that it has only just begun: open the door , press and hold
the button, the machine will switch of f.
Switch the machine back on using the button and select
the new wash cycle and any desired options; Start the wash cycl e
by pressing button and closing the door within 4 sec.
Without switching of f the machine, open the door (
led starts blinking) ( ) and place the
crockery inside the dishwasher . Press the button
and close the door within 4 sec., the cycle will resume from the
point at which it was interrupted.
If the door is opened during the wash cycle, or if there is a power
cut, the cycle stops. Press the button and close
the door within 4 sec., the cycle will resume from the point at
which it was interrupted.
DAILY USE
Functions
- Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
consumption.
- Mixed soil. For normally soiled dishes with dried food residues.
- Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
for delicate items).
- Use to refresh crockery planned to be washed later. No detergent to be used with this program.
- Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
- Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
maintenance of the dishwasher.
- Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
using hot water.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL P ANEL) .
see PROGRAMS T ABLE
If there are not many dishes to be washed, a half load
cycle may be used in order to save water , electricity and
detergent. Select the program and press the HALF LOAD
button: the indicator light will light up. P ress the HALF
LOAD button to deselect this option.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the ST AR T/P AUSE button for 3 seconds (the
corresponding symbol will light up) if you use combined
detergents in tablet form (rinse aid, salt and detergent in
1 dose).
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
– enabled – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
9
ENGLISH
1. Press the DELA Y button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of
the selected wash cycle will be increased.
2. Select the wash program, press the ST AR T/P AUSE
button and within 4 seconds close the door: the timer
will begin counting down.
3. Once this time has elapsed, the indicator light «h»
switches of f and the wash cycle begins.
T o adjust the delay time and select a shorter period of time,
press the DELA Y button. T o cancel it, press the button
repeatedly until the selected delayed start indicator light
«h» switches of f.
The DELA Y function cannot be set once a wash cycle
has been started.
NaturalDry
Door opening system NaturalDry is a convection drying system
which automatically opens the door during/after drying phase to
ensure exceptional drying performance every day . Door opens at
the temperature that is safe to your kitchen furniture.
As additional steam protection, special designed protection foil is
added together with the dishwasher . T o see how to mount protec-
tion foil please refer to (INST ALLA TION GUIDE) .
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
button (6 sec).
2. Y ou switched to NaturalDry Control Menu, you could change
status of NaturalDry functionality by pressing button:
E – enabled d – disabled
T o conrm the change and exit from the Control Menu please
press and hold button (3 sec).
DELA Y
The start time of the program may be delayed for a period
of time between 1 and 12 hours.
Program
Drying
phase
Natural
Dry
A vailable
options *)
Duration of
wash pro-
gram
(h:min) **)
W ater
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
50° 2:45 12.0 0.92
1 Eco
2 Conventional
wash and dry 55° 2:00 15.0 1.35
3 Intensive 65° - 2:30 15.0 1.50
4 Fast 50° - - 0:55 1 1.5 1.10
5 Sanitizing 65° - 1:40 1 1.5 1.30
6 Pre-W ash
-
- - 0:10 4.5 0.01
7 Self-Clean 65° - - 0:50 8.0 0.80
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Note for T est Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
